Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM37A0E _58 Vehicle Interior _086884 DOOR LOCK _0417738 POWER DOOR LOCK CONTROL SYSTEM W

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



HINT:

The following items can be customized.


a.

Customizing with the GTS

i.

Connect the GTS to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the GTS on.


iv.

Enter the following menus: Customize Setting / Door Lock.


v.

Select the setting by referring to the table below.

Door Lock
Tester Display Description Default Setting ECU
Unlock Key Twice Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock Function that locks all doors when the vehicle reaches a certain speed. ON 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Lock/Shift Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
Auto Unlock/Shift Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON. OFF 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
All Unlock/Open-Close Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off. ON or OFF* 0:OFF,1:ON Main body ECU (Multiplex network body ECU)
50006 2

*: Default setting differs depending on the country.




b.

Customizing with the multi-display

i.

Turn the ignition switch to ON.


ii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Door lock settings. (for Type A)


iii.

Enter the following menus: MENU / Setup / Vehicle / Vehicle customisation / Door lock settings. (for Type B)


iv.

Select the setting by referring to the table below.

Display Description Default Setting Relevant ECU
Speed sensitive auto locking Function that locks all doors when the vehicle reaches a certain speed. On On or Off Main body ECU (Multiplex network body ECU)
Auto lock by shift from P Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed. Off On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by shift to P Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON Off On or Off Main body ECU (Multiplex network body ECU)
Auto unlock by driver door Function that unlocks the other doors when the driver door is opened within approximately 43 seconds of the ignition switch being turned off On or Off* On or Off Main body ECU (Multiplex network body ECU)

*: Default setting differs depending on the country.