Make sure to check the items listed below before proceeding with troubleshooting.
Do not perform "Smart Code Reset" (all key ID erasure) until all of the malfunctions and symptoms have been confirmed and resolved. If all key ID erasure is performed without confirming or resolving malfunctions, key registration will be unable to be performed, resulting in unnecessary part replacement.
Check that the entry and start system has not been canceled in the customize function.
Replace parts related to the wireless door lock and entry and start system according to the inspection procedure.
If the wireless door lock and entry and start system does not operate, first check the customize item and make sure that the wireless door lock and entry and start system is not turned off.
The wireless door lock and entry and start system primarily uses the following systems.
Power door lock system
Wireless door lock system
Entry and start system (for Entry Function)
Entry and start system (for Start Function)
: Steering lock function
: Immobiliser function
Perform troubleshooting procedures with other registered keys if available.
Confirm how vehicle was brought to workshop
Vehicle was driven
Vehicle was towed
The malfunction location may be narrowed down by confirming whether the vehicle was driven or towed.
| Proceed to |
|---|
| NEXT |
NEXT
for HV Model: Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function, HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING
for Gasoline Model: Click hereVehicle Interior>THEFT DETERRENT / KEYLESS ENTRY>ENTRY AND START SYSTEM (for Start Function, Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING