Wear protective gloves. Sharp areas on the seat frame may injure your hands.
79021A
1.INSTALL NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY
When installing a No. 2 seat cushion cover sub-assembly, refer to Precaution in order to prevent wrinkles from forming.
Engage the 14 claws.
Be careful not to damage the No. 2 seat cushion cover sub-assembly.
Engage the 19 hooks to install the No. 2 seat cushion cover sub-assembly.
Be careful not to damage the No. 2 seat cushion cover sub-assembly.
72308
2.INSTALL RECLINING CONTROL LINK SUB-ASSEMBLY LH (for LH Side)
Install the reclining control link sub-assembly LH with the 2 nuts.
71983
3.INSTALL REAR SEAT HEADREST GUIDE (for LH Side)
Engage the 2 claws and guide to install the rear seat headrest guide.
71940E
4.INSTALL NO. 2 SEAT HEADREST ASSEMBLY (for LH Side)
Install the No. 2 seat headrest assembly with the 3 nuts.
72660L
5.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY LH (for LH Side)
Route the rear No. 2 seat cushion lock cable assembly LH as shown in the illustration and engage the clamp.
Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly LH.
72660J
6.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for LH Side)
Route the rear No. 2 seat cushion lock cable assembly as shown in the illustration.
Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly.
71844C
7.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)
|
Install in this Direction |
Engage the claw, clip and guide as shown in the illustration to install the rear No. 2 seat reclining cover LH.
71844A
8.INSTALL REAR NO. 2 SEAT RECLINING COVER LH (for LH Side)
|
Install in this Direction |
Engage the claw and guide as shown in the illustration to install the rear No. 2 seat reclining cover LH.
71844K
9.INSTALL REAR NO. 2 SEAT NO. 2 RECLINING COVER LH (for LH Side)
|
Install in this Direction |
Engage the claw and guide as shown in the illustration to install the rear No. 2 seat No. 2 reclining cover LH.
72598D
10.INSTALL NO. 2 RECLINING REMOTE CONTROL BEZEL LH (for LH Side)
|
Install in this Direction |
Engage the 9 claws as shown in the illustration to install the No. 2 reclining remote control bezel LH.
|
Insert in this Direction |
Insert the rear No. 2 seat cushion lock cable assembly LH as shown in the illustration.
71704
11.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for LH Side)
Install the rear side seat band sub-assembly.
79024
12.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY LH (for LH Side)
When installing a No. 2 seatback cover sub-assembly LH, refer to precaution in order to prevent wrinkles from forming.
Engage the 10 claws to install the No. 2 seatback cover sub-assembly LH to the No. 2 seatback pad LH.
Be careful not to damage the No. 2 seatback cover sub-assembly LH.
13.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD LH (for LH Side)
Engage the 8 clips.
Engage the 6 hooks.
|
Fastener |
Engage the 4 fasteners and 4 hooks to install the separate type rear seatback cover with pad LH.
79207C
14.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY LH (for LH Side)
|
Install in this Direction |
Engage the guide as shown in the illustration.
Engage the 6 clips and 2 claws as shown in the illustration to install the No. 2 seatback board sub-assembly LH.
72057B
15.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for LH Side)
Connect the rear No. 2 seat cushion lock cable assembly LH.
|
Install in this Direction |
Engage the guide as shown in the illustration.
Install the rear seat lock control lever sub-assembly with the 2 screws.
72616A
16.INSTALL REAR SEATBACK LOCK STRIKER COVER LH (for LH Side)
|
Install in this Direction |
Engage the 2 guides and 4 claws as shown in the illustration to install the rear seatback lock striker cover LH
79273A
17.INSTALL NO. 2 SEAT NO. 2 HINGE COVER (for LH Side)
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the 5 claws and 4 guides as shown in the illustration to install the No. 2 seat No. 2 hinge cover.
79273
18.INSTALL NO. 2 SEAT HINGE COVER (for LH Side)
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Engage the 5 claws and 4 guides as shown in the illustration to install the No. 2 seat hinge cover.
71848K
19.INSTALL SEAT ADJUSTER COVER CAP (for LH Side)
Install the 2 seat adjuster cover caps.
72307
20.INSTALL RECLINING CONTROL LINK SUB-ASSEMBLY RH (for RH Side)
Install the reclining control link sub-assembly RH with the 2 nuts.
71983
21.INSTALL REAR SEAT HEADREST GUIDE (for RH Side)
Use the same procedure as for the LH side.
71940E
22.INSTALL NO. 2 SEAT HEADREST ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
72660K
23.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY RH (for RH Side)
Route the rear No. 2 seat cushion lock cable assembly RH as shown in the illustration and engage the clamp.
Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly RH.
72660J
24.INSTALL REAR NO. 2 SEAT CUSHION LOCK CABLE ASSEMBLY (for RH Side)
Route the rear No. 2 seat cushion lock cable assembly as shown in the illustration.
Engage the 4 clamps to install the rear No. 2 seat cushion lock cable assembly.
71843D
25.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)
Use the same procedure as for the LH side.
71843A
26.INSTALL REAR NO. 2 SEAT RECLINING COVER RH (for RH Side)
Use the same procedure as for the LH side.
71843K
27.INSTALL REAR NO. 2 SEAT NO. 2 RECLINING COVER RH (for RH Side)
Use the same procedure as for the LH side.
72597E
28.INSTALL NO. 2 RECLINING REMOTE CONTROL BEZEL RH (for RH Side)
Use the same procedure as for the LH side.
71697M
29.INSTALL REAR SEATBACK PROTECTOR (for RH Side)
Engage the guide.
Install the rear seatback protector with the screw.
71704
30.INSTALL REAR SIDE SEAT BAND SUB-ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
79023
31.INSTALL NO. 2 SEATBACK COVER SUB-ASSEMBLY RH (for RH Side)
When installing a No. 2 seatback cover sub-assembly RH, refer to precaution in order to prevent wrinkles from forming.
Engage the 10 claws to install the No. 2 seatback cover sub-assembly RH to the No. 2 seatback pad RH.
Be careful not to damage the No. 2 seatback cover sub-assembly RH.
32.INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD RH (for RH Side)
Engage the 8 clips.
Engage the 8 hooks.
|
Fastener |
Engage the 4 fasteners and 4 hooks to install the separate type rear seat cushion cover with pad RH.
79207B
33.INSTALL NO. 2 SEATBACK BOARD SUB-ASSEMBLY RH (for RH Side)
|
Install in this Direction |
Engage the 2 guides as shown in the illustration.
Engage the 8 clips and 2 claws as shown in the illustration to install the No. 2 seatback board sub-assembly RH.
72057B
34.INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY (for RH Side)
Use the same procedure as for the LH side.
72615A
35.INSTALL REAR SEATBACK LOCK STRIKER COVER RH (for RH Side)
Use the same procedure as for the LH side.
79273A
36.INSTALL NO. 2 SEAT NO. 2 HINGE COVER (for RH Side)
Use the same procedure as for the LH side.
79273
37.INSTALL NO. 2 SEAT HINGE COVER (for RH Side)
Use the same procedure as for the LH side.
71848K
38.INSTALL SEAT ADJUSTER COVER CAP (for RH Side)
Use the same procedure as for the LH side.