Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM (for HV Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0417900 CRUISE CONTROL SYSTEM(for HV Model) U

CRUISE CONTROL  CRUISE CONTROL SYSTEM(for HV Model)  TERMINALS OF ECU  


CHECK HYBRID VEHICLE CONTROL ECU


C338835E24
1.25,0.323 1.667,0.583 0.417,0.26 3.271,0.292 3.688,0.552 0.417,0.26 5.313,0.302 5.729,0.563 0.417,0.26 1.333,0.375 1.792,0.573 0.458,0.198 10 false A31 3.354,0.344 3.813,0.542 0.458,0.198 10 false A32 5.396,0.354 5.854,0.552 0.458,0.198 10 false H67

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbols) Terminal Description Condition Specified Condition
A31-7 (STP) - H67-3 (E1) Stop light switch assembly signal Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A32-28 (ST1-) - H67-3 (E1) Stop light switch assembly signal Ignition switch ON, brake pedal depressed Below 1 V
Ignition switch ON, brake pedal released 11 to 14 V
H67-14 (CCS) - H67-3 (E1) Steering pad switch circuit Cruise control switch not pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω