If any of the following conditions are detected while the cruise control system is controlling vehicle speed, the system clears the vehicle speed stored in the hybrid vehicle control ECU and cancels control of vehicle speed by the cruise control system.
| Auto Cancel Condition | Warning | Fail-safe Deactivation Condition | ||
|---|---|---|---|---|
| Multi-information Display | Cruise Control Indicator | Warning Buzzer | ||
| Open or short in stop light switch circuit | Cruise Control Malfunction Visit Your Dealer | Does not illuminate | Sounds | Cruise control system is turned off and back on again using the cruise control main switch. |
·
Problem with stop light switch input circuit ·
Problem with cruise control main switch cancel circuit ·
Malfunction is detected in the electronically controlled brake system ·
Communication stop between No. 2 skid control ECU (brake actuator assembly) and hybrid vehicle control ECU |
Cruise Control Malfunction Visit Your Dealer | Does not illuminate | Sounds | Ignition switch is turned off and back to ON again. |
| Malfunction in hybrid control system | - | Does not illuminate | - | Cruise control system is turned off and back on again using the cruise control main switch. |
| If the following condition occurs, the ECM cancels control of vehicle speed by the cruise control system (Stored vehicle speed is maintained):
·
Vehicle speed is less than approximately 30 km/h (20 mph) while driving with the cruise control system controlling vehicle speed |
- | Illuminates | - | +RES switch is pushed. |
| Vehicle speed is less than stored vehicle speed by approximately 16 km/h (10 mph) or more | - | Illuminates | - | -SET switch is pushed. |
·
VSC operates while driving with cruise control system controlling vehicle speed ·
TRC operates for a certain period of time while driving with cruise control system controlling vehicle speed. ·
TRC is turned off ·
VSC is turned off |
- | Illuminates | - | +RES switch is pushed. |