Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81340
1.SEPARATE VANITY LIGHT ASSEMBLY
Using a moulding remover, disengage the claw to separate the vanity light assembly.
| *A | for LH Side | *B | for RH Side |
81340B
2.REMOVE VANITY LIGHT BULB
|
Remove in this Direction |
Remove the vanity light bulb from the bulb holder as shown in the illustration.
81340B
3.INSTALL VANITY LIGHT BULB
|
Install in this Direction |
Install the vanity light bulb to the bulb holder as shown in the illustration.
81340
4.INSTALL VANITY LIGHT ASSEMBLY
Engage the claw to install the vanity light assembly.
| *A | for LH Side | *B | for RH Side |