81360T
1.REMOVE SPOT LIGHT ASSEMBLY
| *a | Protective Tape |
|
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the spot light lens.
Use the same procedure for the RH side and LH side.
| *a | Protective Tape |
|
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
| *a | Protective Tape |
|
Front |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws as shown in the illustration.
| *a | Protective Tape |
|
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the claw.
|
Front |
Disengage the 2 guides to separate the spot light housing.
|
Front |
Disengage the 8 claws to remove the spot light housing from the map light sub-assembly.
81360U
2.REMOVE SPOT LIGHT BULB
Remove the spot light bulb from the map light sub-assembly.
Use the same procedure for the RH side and LH side.
81269
3.REMOVE MAP LIGHT SWITCH
|
Remove in this Direction |
Disengage the 2 guides to remove the map light switch as shown in the illustration.
Use the same procedure for the RH side and LH side.