Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
81360U
1.REMOVE SPOT LIGHT BULB (except Panoramic Moon Roof)
| *a | Protective Tape |
|
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the spot light lens.
|
Front |
|
Remove in this Direction |
Remove the spot light bulb from the map light sub-assembly as shown in the illustration.
81360U
2.INSTALL SPOT LIGHT BULB (except Panoramic Moon Roof)
|
Front |
|
Install in this Direction |
Install the spot light bulb to the map light sub-assembly as shown in the illustration.
|
Front |
Engage the 4 claws to install the spot light lens.
81361E
3.REMOVE NO. 2 SPOT LIGHT LENS (for Panoramic Moon Roof)
| *a | Protective Tape |
Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws and 2 guides to remove the No. 2 spot light lens.
81360U
4.REMOVE SPOT LIGHT BULB (for Panoramic Moon Roof)
|
Remove in this Direction |
Remove the spot light bulb from the map light sub-assembly as shown in the illustration.
81360U
5.INSTALL SPOT LIGHT BULB (for Panoramic Moon Roof)
|
Install in this Direction |
Install the spot light bulb to the map light sub-assembly as shown in the illustration.
81361E
6.INSTALL NO. 2 SPOT LIGHT LENS (for Panoramic Moon Roof)
Engage the 2 claws and 2 guides to install the No. 2 spot light lens.