81240
1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY
| *a | Protective Tape |
|
Front |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light lens.
| *a | Protective Tape |
|
Front |
|
Remove in this Direction |
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws as shown in the illustration to separate the room light housing.
| *1 | Room Light Switch Base |
| *a | Protective Tape |
|
Front |
Disengage the clamp.
Using a screwdriver with its tip wrapped with protective tape, disengage the 4 claws to remove the room light housing from the room light switch base.
81240L
2.REMOVE ROOM LIGHT BULB
Remove the room light bulb from the room light switch base.