Home › Steering › STEERING COLUMN › STEERING PAD SWITCH
RM37A0E _55 Steering _086875 STEERING COLUMN _0418170 STEERING PAD SWITCH G

STEERING COLUMN  STEERING PAD SWITCH  INSPECTION  


PROCEDURE

Hide 84250A 1.INSPECT STEERING PAD SWITCH ASSEMBLY (for Type A)

a.

Measure the resistance according to the value(s) in the table below.

C425041C01
2.344,2.458 3.042,2.458 false 2.083,2.344 2.792,2.125 false 2.344,3.333 2.333,2.802 false 1.792,3.292 2.042,2.781 false 1.333,3.167 1.75,2.75 false 1.844,2.333 1.229,1.885 false 1.115,2.708 1.833,2.51 false 1.031,2.333 1.677,2.365 false 2.26,2.146 2.229,1.469 false 1.885,2.177 1.75,1.646 false 5.417,2.219 5.813,1.813 false 5.323,2.385 6.052,2.375 false 5.177,2.167 5.281,1.604 false 4.885,2.167 4.885,1.375 false 5.375,3.344 5.146,2.781 false 5.792,3.083 5.396,2.76 false 6,2.698 5.229,2.521 false 4.125,2.313 4.813,2.469 false 4.823,2.792 4.833,3.625 false 3.104,0.667 3.438,0.927 false 3.302,0.51 3.521,0.917 false 3.635,0.417 3.625,0.917 false 3.729,0.917 4.031,0.5 false 3.823,1.052 4.229,1.188 false 3.635,1.052 3.969,1.375 false 3.521,1.063 3.115,1.323 false 3.427,1.063 3.063,1.167 false 3.323,0.948 2.906,0.906 false 4.24,0.885 3.823,0.938 false 0.229,0.146 0.542,0.344 0.313,0.198 10 false *a 2.156,1.26 2.469,1.458 0.313,0.198 10 false *g 1.646,1.479 1.958,1.677 0.313,0.198 10 false *b 1.094,1.781 1.406,1.979 0.313,0.198 10 false *f 0.875,2.24 1.188,2.438 0.313,0.198 10 false *e 0.958,2.635 1.271,2.833 0.313,0.198 10 false *c 1.177,3.115 1.49,3.313 0.313,0.198 10 false *k 1.708,3.302 2.021,3.5 0.313,0.198 10 false *j 2.292,3.354 2.604,3.552 0.313,0.198 10 false *i 3.073,2.375 3.385,2.573 0.313,0.198 10 false *h 2.823,2.042 3.135,2.24 0.313,0.198 10 false *d 3.99,2.229 4.188,2.438 0.198,0.208 10 false *t 4.802,1.188 5.302,1.354 0.5,0.167 10 false *s 5.25,1.427 5.563,1.625 0.313,0.198 10 false *o 6.073,2.292 6.385,2.49 0.313,0.198 10 false *r 5.802,1.677 6.115,1.875 0.313,0.198 10 false *q 6.021,2.615 6.333,2.813 0.313,0.198 10 false *p 5.781,3.104 6.094,3.302 0.313,0.198 10 false *l 5.292,3.344 5.604,3.542 0.313,0.198 10 false *m 4.771,3.625 5.094,3.875 0.323,0.25 10 false *n 3.49,0.25 3.906,0.469 0.417,0.219 10 false +DP 3.125,0.344 3.51,0.573 0.385,0.229 10 false AU1 2.802,0.542 3.292,0.792 0.49,0.25 10 false CCS 2.74,1.094 3.104,1.281 0.365,0.188 10 false DIST 2.958,1.333 3.448,1.521 0.49,0.188 10 false AU2 3.875,1.385 4.344,1.656 0.469,0.271 10 false EAU 4.271,1.115 4.938,1.344 0.667,0.229 10 false ECC 3.875,0.323 4.354,0.573 0.479,0.25 10 false +DP2 2.604,0.823 3.094,1.073 0.49,0.25 10 false IL+2 4.281,0.802 4.771,1.052 0.49,0.25 10 false IL-2
*a Component without harness connected
(Steering Pad Switch Assembly)
*b Up
*c Down *d Right
*e Left *f OK
*g Back *h On/off Hook
*i Voice *j Volume+
*k Volume- *l Seek+
*m Seek- *n MODE
*o +RES *p -SET
*q Cruise Control Main *r CANCEL
*s Distance Control *t Lane Departure Alert


Standard Resistance:
Tester Connection Condition Specified Condition
3 (AU1) - 10 (EAU) No switch pushed 95 to 105 kΩ
Seek+ switch pushed Below 2.5 Ω
Seek- switch pushed 313 to 345 Ω
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2955 to 3265 Ω
9 (AU2) - 10 (EAU) No switch pushed 95 to 105 kΩ
MODE switch pushed Below 2.5 Ω
On/off hook switch pushed 950 to 1050 Ω
Voice switch pushed 2955 to 3265 Ω
5 (+DP2) - 10 (EAU) No switch pushed 95 to 105 kΩ
Left switch pushed Below 2.5 Ω
Up switch pushed 313 to 345 Ω
Down switch pushed 950 to 1050 Ω
Right switch pushed 2955 to 3265 Ω
4 (+DP) - 10 (EAU) No switch pushed 95 to 105 kΩ
OK switch pushed Below 2.5 Ω
Back switch pushed 313 to 345 Ω
8 (DIST) - 12 (ECC) No switch pushed 1 MΩ or higher
Distance control switch pushed Below 2.5 Ω
Lane departure alert switch pushed 228 to 252 Ω
2 (CCS) - 12 (ECC) No switch pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω


HINT:

If the result is not as specified, replace the steering pad switch assembly.



b.

Check the illumination.

i.

Connect a positive (+) lead from the auxiliary battery to terminal 1 (IL+2) and a negative (-) lead to terminal 6 (IL-2) of the steering pad switch assembly connector.


ii.

Check that the steering pad switch assembly illumination illuminates.

OK:

The steering pad switch assembly illumination illuminates.


HINT:

If the result is not as specified, replace the steering pad switch assembly.




Hide 84250A 2.INSPECT STEERING PAD SWITCH ASSEMBLY (for Type B)

a.

Measure the resistance according to the value(s) in the table below.

C425040C01
2.417,2.563 3.115,2.563 false 2.177,2.458 2.885,2.24 false 2.406,3.427 2.396,2.896 false 1.885,3.385 2.135,2.875 false 1.427,3.26 1.844,2.844 false 1.948,2.438 1.333,1.99 false 1.208,2.823 1.927,2.625 false 1.135,2.438 1.781,2.469 false 2.333,2.26 2.302,1.583 false 1.99,2.281 1.854,1.75 false 5.302,2.333 5.698,1.927 false 5.219,2.49 5.948,2.479 false 5.063,2.281 5.167,1.719 false 5.271,3.438 5.042,2.875 false 5.677,3.177 5.281,2.854 false 5.896,2.792 5.125,2.615 false 4.76,2.896 4.771,3.729 false 3.104,0.813 3.438,1.073 false 3.302,0.656 3.521,1.063 false 3.635,0.563 3.625,1.063 false 3.729,1.073 4.031,0.656 false 3.813,1.188 4.219,1.323 false 3.635,1.198 3.969,1.521 false 3.521,1.198 3.115,1.458 false 3.323,1.083 2.906,1.042 false 4.24,1.031 3.823,1.083 false 0.229,0.146 0.542,0.344 0.313,0.198 10 false *a 2.219,1.375 2.531,1.573 0.313,0.198 10 false *g 1.75,1.573 2.063,1.771 0.313,0.198 10 false *b 1.198,1.896 1.51,2.094 0.313,0.198 10 false *f 0.979,2.354 1.292,2.552 0.313,0.198 10 false *e 1.052,2.771 1.365,2.969 0.313,0.198 10 false *c 1.271,3.208 1.583,3.406 0.313,0.198 10 false *k 1.792,3.396 2.104,3.594 0.313,0.198 10 false *j 2.365,3.448 2.677,3.646 0.313,0.198 10 false *i 3.146,2.479 3.458,2.677 0.313,0.198 10 false *h 2.896,2.135 3.208,2.333 0.313,0.198 10 false *d 5.115,1.531 5.427,1.729 0.313,0.198 10 false *o 5.969,2.385 6.281,2.583 0.313,0.198 10 false *r 5.708,1.792 6.021,1.99 0.313,0.198 10 false *q 5.917,2.708 6.229,2.906 0.313,0.198 10 false *p 5.708,3.156 6.021,3.354 0.313,0.198 10 false *l 5.208,3.438 5.521,3.635 0.313,0.198 10 false *m 4.708,3.74 5.031,3.99 0.323,0.25 10 false *n 3.49,0.385 3.906,0.604 0.417,0.219 10 false +DP 3.135,0.49 3.521,0.719 0.385,0.229 10 false AU1 2.792,0.719 3.281,0.969 0.49,0.25 10 false CCS 2.823,1.385 3.313,1.573 0.49,0.188 10 false AU2 4.01,1.448 4.479,1.719 0.469,0.271 10 false EAU 4.26,1.25 4.927,1.479 0.667,0.229 10 false ECC 3.875,0.49 4.354,0.74 0.479,0.25 10 false +DP2 2.604,0.958 3.094,1.208 0.49,0.25 10 false IL+2 4.281,0.948 4.771,1.198 0.49,0.25 10 false IL-2
*a Component without harness connected
(Steering Pad Switch Assembly)
*b Up
*c Down *d Right
*e Left *f OK
*g Back *h On/off Hook
*i Voice *j Volume+
*k Volume- *l Seek+
*m Seek- *n MODE
*o +RES *p -SET
*q Cruise Control Main *r CANCEL


Standard Resistance:
Tester Connection Condition Specified Condition
3 (AU1) - 10 (EAU) No switch pushed 95 to 105 kΩ
Seek+ switch pushed Below 2.5 Ω
Seek- switch pushed 313 to 345 Ω
Volume+ switch pushed 950 to 1050 Ω
Volume- switch pushed 2955 to 3265 Ω
9 (AU2) - 10 (EAU) No switch pushed 95 to 105 kΩ
MODE switch pushed Below 2.5 Ω
On/off hook switch pushed 950 to 1050 Ω
Voice switch pushed 2955 to 3265 Ω
5 (+DP2) - 10 (EAU) No switch pushed 95 to 105 kΩ
Left switch pushed Below 2.5 Ω
Up switch pushed 313 to 345 Ω
Down switch pushed 950 to 1050 Ω
Right switch pushed 2955 to 3265 Ω
4 (+DP) - 10 (EAU) No switch pushed 95 to 105 kΩ
OK switch pushed Below 2.5 Ω
Back switch pushed 313 to 345 Ω
2 (CCS) - 12 (ECC) No switch pushed 1 MΩ or higher
Cruise control main switch pushed Below 2.5 Ω
CANCEL switch pushed 228 to 252 Ω
+RES switch pushed 599 to 661 Ω
-SET switch pushed 1463 to 1617 Ω


HINT:

If the result is not as specified, replace the steering pad switch assembly.



b.

Check the illumination.

i.

Connect a positive (+) lead from the auxiliary battery to terminal 1 (IL+2) and a negative (-) lead to terminal 6 (IL-2) of the steering pad switch assembly connector.


ii.

Check that the steering pad switch assembly illumination illuminates.

OK:

The steering pad switch assembly illumination illuminates.


HINT:

If the result is not as specified, replace the steering pad switch assembly.