84255
1.INSPECT STEERING HEATER SWITCH
| *a | Component without harness connected
(Steering Heater Switch) |
Check the switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 5 (IG) - 2 (B) | Steering heater switch is pushed | Below 1 Ω |
| 5 (IG) - 2 (B) | Steering heater switch is not pushed | 10 kΩ or higher |
If the result is not as specified, replace the steering heater switch.
Indicator Inspection
Apply auxiliary battery voltage to the steering heater switch and check that the indicator illuminates.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 2 (B)
Auxiliary battery negative (-) → Terminal 4 (E) |
Illuminates |
If the result is not as specified, replace the steering heater switch.
Check the switch illumination.
Apply auxiliary battery voltage to the steering heater switch and check that the steering heater switch illuminates.
| Condition | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 6 (ILL+)
Auxiliary battery negative (-) → Terminal 1 (ILL-) |
Illumination illuminates |
If the result is not as specified, replace the steering heater switch.