PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following systems after the cable is reconnected.
If the auxiliary battery has been discharged and charged or the cable has been disconnected and reconnected to the negative (-) auxiliary battery terminal, perform Steering Sensor Zero Point Calibration.
Click hereVehicle Interior>PRE-COLLISION>PRE-COLLISION SYSTEM>INITIALIZATION
PRECAUTIONS FOR PRE-COLLISION SYSTEM
Conditions under which the system may operate even if there is no possibility of a collision.
In some situations such as the following, the system may determine that there is a possibility of a frontal collision and operate.
When passing a detectable object, etc.
When changing lanes while overtaking a detectable object, etc.
When approaching a detectable object in an adjacent lane or on the roadside, such as when changing the course of travel or driving on a winding road
When rapidly closing on a detectable object, etc.
When approaching objects on the roadside, such as detectable objects, guardrails, utility poles, trees, or walls
When there is a detectable object or other object by the roadside at the entrance of a curve
When there are patterns or paint in front of the vehicle that may be mistaken for a detectable object
When the front of the vehicle is hit by water, snow, dust, etc.
When overtaking a detectable object that is changing lanes or making a right/left turn
When passing a detectable object in an oncoming lane that is stopped to make a right/left turn
When a detectable object approaches very close and then stops before entering the path of the vehicle
When the front of the vehicle is raised or lowered, such as when on an uneven or undulating road surface
When driving on a road surrounded by a structure, such as in a tunnel or on a steel bridge
When there is a metal object (manhole cover, steel plate, etc.), steps, or a protrusion in front of the vehicle
When passing under an object (road sign, billboard, etc.)
When approaching an electric toll gate barrier, parking area barrier, or other barrier that opens and closes
When using an automatic car wash
When driving through or under objects that may contact the vehicle, such as thick grass, tree branches, or a banner
When driving through steam or smoke
When driving near an object that reflects radio waves, such as a large truck or guardrail
When driving near a TV tower, broadcasting station, electric power plant, or other location where strong radio waves or electrical noise may be present
Situations in which the system may not operate properly
In some situations such as the following, an object may not be detected by the millimeter wave radar sensor assembly and forward recognition camera, preventing the system from operating properly:
When a detectable object is approaching the vehicle
When the vehicle or a detectable object is wobbling
When a detectable object makes an abrupt maneuver (such as sudden swerving, acceleration or deceleration)
When the vehicle approaches a detectable object rapidly
When a detectable object is not directly in front of the vehicle
When a detectable object is near a wall, fence, guardrail, manhole cover, vehicle, steel plate on the road, etc.
When a detectable object is under a structure
When part of a detectable object is hidden by an object, such as large baggage, an umbrella, or guardrail
When multiple detectable objects are close together
When the sun or other light is shining directly on a detectable object
When a detectable object is a shade of white and looks extremely bright
When a detectable object appears to be nearly the same color or brightness as its surroundings
When a detectable object cuts or suddenly emerges in front of the vehicle
When the front of the vehicle is hit by water, snow, dust, etc.
When a very bright light ahead, such as the sun or the headlights of oncoming traffic, shines directly into the forward recognition camera
When approaching the side or front of a vehicle ahead
When a vehicle ahead is a bicycle*1 or motorcycle
When a vehicle ahead is narrow, such as a personal mobility vehicle
When a preceding vehicle has a small rear end, such as an unloaded truck
When a preceding vehicle has a low rear end, such as a low bed trailer
When a vehicle ahead has extremely high ground clearance
When a vehicle ahead is carrying a load which protrudes past its rear bumper
When a vehicle ahead is irregularly shaped, such as a tractor or side car
When a vehicle ahead is a child sized bicycle, a bicycle that is carrying a large load, a bicycle ridden by more than one person, or a uniquely shaped bicycle (bicycle with a child seat, tandem bicycle, etc.)*2
When a pedestrian/or the riding height of a bicyclist ahead is shorter than approximately 3.2 ft. (1 m) or taller than approximately 6.5 ft. (2 m)*2
When a pedestrian/bicyclist is wearing oversized clothing (a rain coat, long skirt, etc.), making their silhouette obscure*2
When a pedestrian is bending forward or squatting or bicyclist is bending forward*2
When a pedestrian/bicyclist is moving fast*2
When a pedestrian is pushing a stroller, wheelchair, bicycle or other vehicle*2
When driving in inclement weather such as heavy rain, fog, snow or a sandstorm
When driving through steam or smoke
When the surrounding area is dim, such as at dawn or dusk, or while at night or in a tunnel, making a detectable object appear to be nearly the same color as its surroundings
When driving in a place where the surrounding brightness changes suddenly, such as at the entrance or exit of a tunnel
After the hybrid control system has started the vehicle has not been driven for a certain amount of time (for HV Model)
After the engine has started the vehicle has not been driven for a certain amount of time (for Gasoline Model)
While making a left/right turn and for a few seconds after making a left/right turn
While driving on a curve and for a few seconds after driving on a curve
When the vehicle is skidding
When the front of the vehicle is raised or lowered
When the wheels are misaligned
When a wiper blade is blocking the forward recognition camera
The vehicle is being driven at extremely high speeds
When driving on a hill
When the millimeter wave radar sensor assembly or forward recognition camera is misaligned
*1: Applicable to vehicles designed for countries/areas that detection of bicyclists is not possible.
*2: Applicable to vehicles designed for countries/areas that detection of pedestrians and/or bicyclists is possible
In some situations such as the following, sufficient braking force may not be obtained, preventing the system from performing properly:
When the braking functions cannot operate to their full extent, such as when the brake parts are extremely cold, extremely hot, or wet
When the vehicle is not properly maintained (brakes or tires are excessively worn, improper tire inflation pressure, etc.)
When the vehicle is being driven on a gravel road or other slippery surface
When the VSC is disabled, the pre-collision system performs the following:
Disables the pre-collision brake assist and pre-collision braking functions.
Turns on the PCS warning light.
Displays "VSC Turned OFF Pre-Collision Brake System Unavailable" on the multi-information display.
PRECAUTION BEFORE SERVICING
When to disable the pre-collision system
In the following situations, disable the system, as it may not operate properly, possibly leading to an accident resulting in death or serious injury:
When the vehicle is being towed
When the vehicle is towing another vehicle
When transporting the vehicle via truck, boat, train or similar means of transportation
When the vehicle is raised on a lift with the hybrid control system on and the tires are allowed to rotate freely (for HV Model)
When the vehicle is raised on a lift with the engine running and the tires are allowed to rotate freely (for Gasoline Model)
When inspecting the vehicle using a drum tester such as a chassis dynamometer or speedometer tester, or when using an on vehicle wheel balancer
When a strong impact is applied to the front bumper or front grille, due to an accident or other reasons
When the vehicle cannot be driven in a stable manner, such as when the vehicle has been in an accident or is malfunctioning
When the vehicle is driven in a sporty manner or off-road
When the tires are not properly inflated
When the tires are very worn
When tires of a size other than specified are installed
When tire chains are installed
When a compact spare tire or an emergency tire puncture repair kit is used
When equipment (snow plow, etc.) that may obstruct the millimeter wave radar sensor assembly or forward recognition camera is temporarily installed to the vehicle
TROUBLESHOOTING PRECAUTIONS
If a malfunction related to terminal contact or part installation occurs, removal and reinstallation of the suspected part may return the system to normal. However, this the normal condition may only be temporary.
When determining the malfunctioning area, before disconnecting connectors or removing/installing parts, check for DTCs and note the vehicle condition and operations that were performed when the malfunction occurred (stored DTCs, etc.).
Be sure to check for DTCs related to other systems. The pre-collision system may be influenced by malfunctions in other systems.
HANDLING PRECAUTIONS
When removing or installing any ECUs or sensors, make sure that the ignition switch is off unless otherwise specified in the procedure.
After removing and installing any ECUs or sensor, make sure to check for DTCs and confirm that no DTCs are output.
PRECAUTION WHEN REPLACING COMPONENTS
Millimeter Wave Radar Sensor Assembly:
When replacing the millimeter wave radar sensor assembly, always replace it with a new one. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the millimeter wave radar sensor assembly will not match the information from the vehicle and a DTC may be stored.
When the millimeter wave radar sensor assembly has been replaced with a new one, it is necessary to perform millimeter wave radar sensor assembly adjustment and front radar acceleration sensor calibration, and to clear the vehicle control history.
Click hereEngine / Hybrid System>CRUISE CONTROL>MILLIMETER WAVE RADAR SENSOR>ADJUSTMENT
Forward Recognition Camera:
If the forward recognition camera has been replaced with a new one or the windshield glass has been removed and installed, forward recognition camera adjustment must be performed.
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)
When replacing the forward recognition camera, always replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
When replacing the forward recognition camera, do not damage the camera lens or allow it to become contaminated with foreign matter.
Do not reuse a forward recognition camera that has been dropped or subjected to a strong impact.
Windshield Glass:
When replacing the windshield glass of a vehicle equipped with a forward recognition camera, make sure to use a Toyota genuine part. If a non-Toyota genuine part is used, the forward recognition camera may not be able to be installed due to a missing bracket or the pre-collision system may not operate properly due to a difference in the transmissivity or black ceramic border.
Do not attach stickers, including transparent stickers, or other items to the windshield glass near the forward recognition camera.