CUSTOMIZE PRE-COLLISION SYSTEM
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the Multi-information Display
Turn the ignition switch to ON.
Select the setting by referring to the table below.
Using the steering pad switches, change the customize settings.
Each item is displayed on the "Setting" tab on the multi-information display.
| Display | Description | Setting | Default |
|---|---|---|---|
| PCS | Turns the pre-collision system function on/off. | ON/OFF | ON |
| Sensitivity | Sets the pre-collision system function warning sensitivity | Early/Middle/Late | Middle |
Customizing with the GTS
The following items can be customized.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Others.
Select the setting by referring to the table below.
| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| PCS Function ON/OFF State Stored | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 1 | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 2 | Refer to the table below | Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| PCS Warning Timing State Stored 3 | Refer to the table below | Not Stored | $00:Not Stored,$01:Stored | Forward recognition camera |
| Customize Setting | Description | Setting |
|---|---|---|
| PCS Function ON/OFF State Stored | Function to maintain the pre-collision system on/off setting when the ignition switch is turned off and then to ON. | Not Stored: Not maintained (Pre-collision system always turns on)
Stored: Maintained |
| PCS Warning Timing State Stored 1 | Function to maintain the sensitivity setting of the pre-collision system when the pre-collision system is turned off and then on. | Not Stored: Not maintained (Setting changes to "Middle")
Stored: Maintained |
| PCS Warning Timing State Stored 2 | Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is on. | Not Stored: Not maintained (Setting changes to "Middle")
Stored: Maintained |
| PCS Warning Timing State Stored 3 | Function to maintain the sensitivity setting of the pre-collision system when the ignition switch is turned off while the pre-collision system is off. | Not Stored: Not maintained (Setting changes to "Middle")
Stored: Maintained |