Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418319 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  U012587  Lost Communication with Multi-axis Acceleration Sensor Module Missing Message  U012687  Lost Communication with Steering Angle Sensor Module Missing Message  U012987  Lost Communication with Brake System Control Module Missing Message  U015587  Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message  U029387  Lost Communication with Hybrid Powertrain Control Module Missing Message  U110687  Lost Communication with Electric Parking Brake Module Missing Message  


DESCRIPTION

The forward recognition camera communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U012587 Lost Communication with Multi-axis Acceleration Sensor Module Missing Message When the vehicle speed is 1 km/h (1 mph) or more, a communication error between the forward recognition camera and yaw rate sensor continues for 5 seconds or more. CAN communication system Radar Cruise2
U012687 Lost Communication with Steering Angle Sensor Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and steering sensor continues for 5 seconds or more. CAN communication system Radar Cruise2
U012987 Lost Communication with Brake System Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and No. 2 skid control ECU (brake actuator assembly) continues for 5 seconds or more. CAN communication system Radar Cruise2
U015587 Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and combination meter assembly continues for 5 seconds or more. CAN communication system Radar Cruise2
U029387 Lost Communication with Hybrid Powertrain Control Module Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the hybrid vehicle control ECU and forward recognition camera is detected for 5 seconds or more. CAN communication system Radar Cruise2
U110687 Lost Communication with Electric Parking Brake Module Missing Message When the ignition switch is ON for 2 seconds or more, a communication error between the forward recognition camera and parking brake ECU assembly continues for 5 seconds or more. CAN communication system Radar Cruise2

PROCEDURE

1.CHECK FOR DTCs
a.

Clear the DTCs.

Powertrain > Radar Cruise2 > Clear DTCs
50002 426

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Radar Cruise2 > Trouble Codes
50001 426
OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

NG