If the vehicle information stored in the forward recognition camera does not match the vehicle information sent from the No. 2 skid control ECU (brake actuator assembly), the forward recognition camera stores DTC U031857.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from |
|---|---|---|---|---|
| U031857 | Software Incompatibility with Brake System Control Module Invalid/Incompatible Software Component | The vehicle information sent from the No. 2 skid control ECU (brake actuator assembly) does not match that stored in the forward recognition camera. | ·
Electronically controlled brake system ·
Forward recognition camera |
Forward recognition camera |
When replacing the forward recognition camera, replace it with a new one. If a forward recognition camera which was installed to another vehicle is used, the information stored in the forward recognition camera will not match the information from the vehicle and a DTC may be stored.
If the forward recognition camera has been replaced with a new one, it is necessary to perform forward recognition camera adjustment.
Forward recognition camera adjustment can be performed by using either One Time Recognition or Sequential Recognition.
One Time Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (ONE TIME RECOGNITION)
Sequential Recognition: Click hereEngine / Hybrid System>CRUISE CONTROL>FRONT CAMERA>ADJUSTMENT (SEQUENTIAL RECOGNITION)
Check for electronically controlled brake system DTCs.
| Result | Proceed to |
|---|---|
| Electronically controlled brake system DTCs are not output | A |
| Electronically controlled brake system DTCs are output | B |
A
B