Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for HV Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418319 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model) C

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for HV Model)  U010487  Lost Communication with Cruise Control Module Missing Message  U012287  Lost Communication with Vehicle Dynamics Control Module Missing Message  U029387  Lost Communication with Hybrid Powertrain Control Module Missing Message  


DESCRIPTION

The hybrid vehicle control ECU communicates with each sensor and ECU via CAN communication.

If any malfunction is detected in a CAN communication circuit, one or more CAN communication system DTCs are stored.

DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from
U010487 Lost Communication with Cruise Control Module Missing Message When the ignition switch is ON and the dynamic radar cruise control system is operating, a communication malfunction between the forward recognition camera and hybrid vehicle control ECU is detected for approximately 1 second or more. CAN communication system Cruise Control
U012287 Lost Communication with Vehicle Dynamics Control Module Missing Message When the ignition switch is ON and the dynamic radar cruise control system is operating, a communication malfunction between the No. 2 skid control ECU (brake actuator assembly) and hybrid vehicle control ECU is detected for approximately 3 seconds or more. CAN communication system Cruise Control
U029387 Lost Communication with Hybrid Powertrain Control Module Missing Message When the dynamic radar cruise control system is operating, a communication malfunction between the No. 2 skid control ECU (brake actuator assembly) and hybrid vehicle control ECU is detected for approximately 1 second or more. CAN communication system Cruise Control

PROCEDURE

1.CHECK FOR DTCs
a.

Clear the DTCs.

Powertrain > Radar Cruise1 > Clear DTCs
50002 399

b.

Make sure that the DTC detection conditions are met.

HINT:

If the detection conditions are not met, the system cannot detect the malfunction.



c.

Check for DTCs.

Powertrain > Radar Cruise1 > Trouble Codes
50001 399
OK:

DTCs are not output.



Result:
Proceed to
OK
NG



OK

NG