Home › Engine / Hybrid System › CRUISE CONTROL › DYNAMIC RADAR CRUISE CONTROL SYSTEM (for Gasoline Model)
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418320 DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model) D

CRUISE CONTROL  DYNAMIC RADAR CRUISE CONTROL SYSTEM(for Gasoline Model)  FREEZE FRAME DATA  


CHECK FREEZE FRAME DATA


HINT:

The ECU records vehicle and driving condition information as freeze frame data the moment a DTC is stored.


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Radar Cruise 1*1 or Radar Cruise 2*2 / Trouble Codes.

Powertrain > Radar Cruise1 > Trouble Codes
50001 374
Powertrain > Radar Cruise2 > Trouble Codes
50001 426

*1: Output from the ECM

*2: Output from the forward recognition camera



e.

Select the DTCs (with snow icon) for which freeze frame data is recorded.

NOTICE:

The operating conditions the moment a DTC is stored are recorded as freeze frame data. Furthermore, only the latest 3 DTCs can be stored by the forward recognition camera.




LIST OF FREEZE FRAME DATA


Powertrain > Radar Cruise1
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Cruise Vehicle Speed Vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Actual vehicle speed -
Cruise Memory Vehicle Speed Stored vehicle speed Min.: 0 km/h (0 mph), Max.: 255 km/h (158 mph) Stored vehicle speed -
Cruise Request Throttle Opening Angle Cruise requested position 0.00 to 124.99 deg Changes depending on the conditions of the dynamic radar cruise control system -
Cruise Target Acceleration Target acceleration while in cruise control mode -13.10 to 13.10 m/s2 Current value displayed -
Driving Support ECU Target Acceleration - - - Cannot be used
Cruise Request Driving Force Cruise request torque signal -10.00 to 9.92 kN Changes depending on the conditions of the dynamic radar cruise control system -
Cruise Request Driving Force Feedback Status - - - Cannot be used
Cruise Control Permission Condition - - - Cannot be used
Cruise Control Condition - - - Cannot be used
Cruise Main Switch Operation Condition Cruise control main switch status OFF or ON OFF: Cruise control main switch not pushed
ON: Cruise control main switch pushed
-
Accelerator Pedal Condition of the accelerator pedal during cruising OFF or ON OFF: Accelerator pedal released
ON: Accelerator pedal depressed
-
Cruise Brake Cancel Switch Cruise control brake cancel condition OFF or ON OFF: Brake pedal released
ON: Brake pedal depressed
-
Stop Light Switch Main-CPU Stop light switch signal OFF or ON OFF: Brake pedal released
ON: Brake pedal depressed
-
Stop Light Switch Sub-CPU - - - Cannot be used
Request Manual Cancel - - - Cannot be used
Request Automatic Cancel - - - Cannot be used
Cruise Brake Control Decision Cruise brake control decision OFF or ON OFF: Cruise brake deactivated
ON: Cruise brake activated
-
Cruise Brake Control Permission Condition - - - Cannot be used
Powertrain > Radar Cruise2
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Total Distance Traveled - - - Cannot be used
Total Distance Traveled - Unit - - - Cannot be used
Cruise Control Mode Cruise control mode signal Vehicle-to-vehicle Distance Control (All Speed), Vehicle-to-vehicle Distance Control (Hi Speed) or Constant Speed Control Vehicle-to-vehicle Distance Control (All Speed): Vehicle-to-vehicle distance control mode (w/ Full-speed Range Following Function)
Vehicle-to-vehicle Distance Control (Hi Speed): Vehicle-to-vehicle distance control mode (w/o Full-speed Range Following Function)
Constant Speed Control: Constant speed mode
-
Estimated Vehicle Acceleration Estimated Vehicle Acceleration Min.: -5.00 m/s2, Max.: 5.00 m/s2 Current value displayed -
Accelerator Pedal Idle Accelerator pedal idle position signal OFF or ON OFF: Accelerator pedal depressed
ON: Accelerator pedal released
-
Forward Vehicle Distance Distance to preceding vehicle Min.: 0 m, Max.: 255 m Current value displayed -
Forward Vehicle Relative Speed Relative speed against preceding vehicle -128 to 127 km/h Current value displayed -
Cruise Warning Request Forward vehicle approach warning signal OFF or ON OFF: Forward vehicle not approaching
ON: Forward vehicle approaching
-
Accelerator Over Ride Accelerator pedal position signal during cruising OFF or ON OFF: Accelerator over ride OFF
ON: Accelerator over ride ON
-
Front Radar Sensor High Temperature Millimeter wave radar sensor assembly high temperature abnormality Normal or High Temperature Normal: Millimeter wave radar sensor assembly temperature is normal
High Temperature: Millimeter wave radar sensor assembly temperature is high
·

"High Temperature" displayed when the millimeter wave radar sensor assembly is in the following condition

-

When the ambient temperature of the millimeter wave radar sensor assembly is 70°C (158°F) or more, such as when the vehicle is left alone in an extremely hot environment


·

When "High Temperature" is displayed, and the dynamic radar cruise control system is in one of the following conditions

-

X2027 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Temperature) is stored

-

"Radar Cruise Control Unavailable" is displayed on the multi-information display


·

If "High Temperature" is displayed, refer to X2027 in the front radar sensor system vehicle control history


Front Radar Sensor Low Voltage Millimeter wave radar sensor assembly low voltage abnormality Normal or Low Voltage Normal: Millimeter wave radar sensor assembly voltage is normal
Low Voltage: Millimeter wave radar sensor assembly voltage is low
·

"Low Voltage" displayed when the millimeter wave radar sensor assembly is in the following condition

-

When the input voltage is approximately 8 V or less, immediately after the engine starts


·

When "Low Voltage" is displayed, and the dynamic radar cruise control system is in one of the following conditions

-

X2028 in the vehicle control history (Front Radar Sensor Outside Guaranteed Operating Voltage) is stored

-

"Radar Cruise Control Unavailable" is displayed on the multi-information display


·

If "Low Voltage" is displayed, refer to X2028 in the front radar sensor system vehicle control history