Home › Engine / Hybrid System › CRUISE CONTROL › LANE CONTROL SYSTEM › 2020.02–2020.11
RM37A0E _51 Engine / Hybrid System _086858 CRUISE CONTROL _0418322 LANE CONTROL SYSTEM D

CRUISE CONTROL  LANE CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


CUSTOMIZE LTA (w/ Lane Centering Function)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the Multi-information Display

i.

Turn the ignition switch to ON.


ii.

Select the setting by referring to the table below.


iii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.


LTA
Display Description Setting Default
Lane Center Lane centering function setting On/Off Off
Steering Assist Steering assist function setting On/Off On
Sensitivity Lane departure alert timing High/Standard High
Sway Warning Vehicle sway warning function setting On/Off On
Sway Sensitivity Sway warning sensitivity setting High/Standard/Low Standard

HINT:

Some LTA functions are operable only when other functions are enabled or operating. Refer to the following table.

Vehicle-to-vehicle Distance Control (With Full-speed Range Following Function) LTA Main Switch Steering Assist Lane Center Sway Warning

●: System/function operating

○: Turned/Set to On

Lane Departure Alert Function - ○ - - -
Steering Assist Function - ○ ○ - -
Lane Centering Function ● ○ ○ ○ -
Vehicle Sway Warning Function - - - - ○





CUSTOMIZE LDA (w/o Lane Centering Function)


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



a.

Customizing with the Multi-information Display

i.

Turn the ignition switch to ON.


ii.

Select the setting by referring to the table below.


iii.

Using the steering pad switches, change the customize settings.

HINT:

Each item is displayed on the "Setting" tab on the multi-information display.


LDA
Display Description Setting Default
Steering Assist Steering assist function setting On/Off On
Sensitivity Lane departure alert timing High/Standard High
Sway Warning Vehicle sway warning function setting On/Off On
Sway Sensitivity Sway warning sensitivity setting High/Standard/Low Standard

HINT:

Some LDA functions are operable only when other functions are enabled or operating. Refer to the following table.

LDA Main Switch Steering Assist Sway Warning

○: Turned/Set to On

Lane Departure Alert Function ○ - -
Steering Assist Function ○ ○ -
Vehicle Sway Warning Function - - ○