Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › MASS AIR FLOW METER
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418442 MASS AIR FLOW METER A

2GR-FKS ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

HINT:

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION


a.

Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

NOTICE:
·

If the mass air flow meter sub-assembly has been struck or dropped, replace it.

·

If reusing the mass air flow meter sub-assembly, be sure to inspect the O-ring.

·

Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.




b.

Connect the mass air flow meter sub-assembly connector.


Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

Click hereEngine / Hybrid System>2GR-FKS (ENGINE CONTROL)>SFI SYSTEM>INITIALIZATION