Home › Engine / Hybrid System › 2GR-FKS (ENGINE CONTROL) › AIR FUEL RATIO SENSOR
RM37A0E _51 Engine / Hybrid System _086849 2GR-FKS ENGINE CONTROL _0418448 AIR FUEL RATIO SENSOR G

2GR-FKS ENGINE CONTROL  AIR FUEL RATIO SENSOR  INSPECTION  


PROCEDURE

Hide 89467C 1.INSPECT AIR FUEL RATIO SENSOR (for Bank 1)

a.
A408220C02
0.917,0.604 1.208,0.604 1.208,0.604 1.479,0.833 true 0.938,1.635 1.229,1.635 1.229,1.635 1.5,1.365 true 1.938,0.823 2.25,0.552 2.25,0.552 2.5,0.552 true 0.26,0.177 0.573,0.333 0.313,0.156 10 false *a 0.677,0.521 0.99,0.719 0.313,0.198 10 false +B 0.583,1.542 1.063,1.802 0.479,0.26 10 false A1A- 2.542,0.469 3.021,0.729 0.479,0.26 10 false HA1A
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA1A) - 4 (A1A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.


Hide 89467B 2.INSPECT AIR FUEL RATIO SENSOR (for Bank 2)

a.
A401882C07
0.896,1.01 1.354,1.01 true 0.896,1.354 1.354,1.354 true 2.125,1 2.583,1 true 0.073,0.083 0.469,0.333 0.396,0.25 10 false *a 0.677,0.917 1.073,1.167 0.396,0.25 10 false +B 0.531,1.26 1.104,1.51 0.573,0.25 10 false A2A- 2.635,0.906 3.135,1.146 0.5,0.24 10 false HA2A
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA2A) - 2 (+B) 20°C (68°F) 1.6 to 3.2 Ω
1 (HA2A) - 4 (A2A-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.