Home › Vehicle Exterior › DOOR / HATCH › BACK DOOR WEATHERSTRIP
RM37A0E _59 Vehicle Exterior _086885 DOOR / HATCH _0418602 BACK DOOR WEATHERSTRIP A

DOOR / HATCH  BACK DOOR WEATHERSTRIP  INSTALLATION  


PROCEDURE

Hide 67881A 1.INSTALL BACK DOOR WEATHERSTRIP

a.
B521257

Make sure to remove any non-drying sealant from the vehicle body.

NOTICE:

If there is any non-drying sealant remaining on the vehicle body, the back door weatherstrip may not be able to be securely installed and may fall off. Make sure to completely remove the non-drying sealant from both the interior side and exterior side installation surfaces on the vehicle body.



b.

Align the joint of a new back door weatherstrip with the back door lock striker and temporarily install the back door weatherstrip.

B563334C01
1.052,0.323 1.406,0.479 true 3.594,0.542 3.844,0.354 true 5.75,0.479 6.063,0.292 true 5.917,1.802 6.104,1.615 true 5.823,3.219 6.052,3.479 true 3.594,2.583 3.823,2.313 true 1.073,3.479 1.333,3.219 true 1.031,1.625 1.24,1.802 true 3.844,0.25 4.042,0.427 0.198,0.177 10 true *a 0.885,0.229 1.198,0.385 0.313,0.156 10 false *b 3.823,2.208 4.01,2.385 0.188,0.177 10 true *c 6.083,0.198 6.396,0.354 0.313,0.156 10 false *b 6.125,1.531 6.438,1.688 0.313,0.156 10 false *b 0.865,1.542 1.177,1.698 0.313,0.156 10 false *b 0.979,3.5 1.292,3.656 0.313,0.156 10 false *b 5.99,3.5 6.302,3.656 0.313,0.156 10 false *b
*a Paint mark (White) *b Paint mark (Yellow)
*c Joint - -
V100135

Cutout
V100136

Flange Position



c.

Align the paint marks on the back door weatherstrip with the flange on the vehicle body indicated by the arrow, and install the back door weatherstrip.

NOTICE:
·

Make sure to position the paint mark correctly during installation. Failure to do so may lead to water ingress.

·

After installation, check that the corners fit correctly.



HINT:

Make sure to install the parts of the back door weatherstrip near the joint and paint mark shown in the illustration first, and then install the corners.