Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
84280D
1.INSTALL POWER BACK DOOR SENSOR ASSEMBLY
Temporarily install the power back door sensor assembly with the 2 clips.
Install the power back door sensor assembly with the 5 screws.
Install each screw in the order shown in the illustration.
Connect the connector.
64780A
2.INSTALL BACK DOOR TRIM PANEL ASSEMBLY
67848E
3.INSTALL BACK DOOR SERVICE HOLE COVER LH
67847
4.INSTALL BACK DOOR SERVICE HOLE COVER RH
Use the same procedure as for the LH side.