77030A
1.INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY
Check the operation of the fuel lid lock with motor assembly (motor operation).
| *a | Component without harness connected
(Fuel Lid Lock with Motor Assembly) |
| *b | Shaft Stroke |
| *c | Lever |
| *d | Shaft |
Apply auxiliary battery voltage to the fuel lid lock with motor assembly connector, and check the operation of the fuel lid lock with motor assembly.
| Auxiliary Battery Connection | Specified Condition |
|---|---|
| Auxiliary battery positive (+) → Terminal 1
Auxiliary battery negative (-) → Terminal 2 |
15.45 to 16.65 mm
(0.608 to 0.656 in.) |
If the result is not as specified, replace the fuel lid lock with motor assembly.
Measure the shaft stroke.
| Area | Condition | Specified Condition |
|---|---|---|
| Shaft stroke | Lever pulled | 15.45 to 16.65 mm
(0.608 to 0.656 in.) |
If the result is not as specified, replace the fuel lid lock with motor assembly.