CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY
Disconnect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*1: for Gasoline Model *2: for HV Model |
|||
| 4F-1 - Body ground | Auxiliary battery power supply | Always*1
Ignition switch off*2 |
11 to 14 V |
| 4B-23 - Body ground | Auxiliary battery power supply | Always*1
Ignition switch off*2 |
11 to 14 V |
| 4B-3 - Body ground | Ground | Always | Below 1 Ω |
| H42-19 (GND2) - Body ground | Ground | Always | Below 1 Ω |
Connect the instrument panel junction block assembly and main body ECU (multiplex network body ECU) connectors.
Measure the voltage and check for pulses according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
|
*1: w/ Ambient Illumination Light |
|||
| 4A-17 - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| 4A-30 - Body ground | ACC power supply | Ignition switch ACC | 11 to 14 V |
| Ignition switch off | Below 1 V | ||
| 4A-31 - Body ground | Rear door courtesy light switch assembly (for RH) input | Rear door RH open | Below 1 V |
| Rear door RH closed | 11 to 14 V | ||
| 4B-9 - Body ground | Courtesy light assembly power supply | DOME CUT relay on | 11 to 14 V |
| DOME CUT relay off | Below 1 V | ||
| 4B-10 - Body ground | Map light assembly, spot light assembly, No. 1 room light assembly and vanity light assembly power supply | DOME CUT relay on | 11 to 14 V |
| DOME CUT relay off | Below 1 V | ||
| 4B-12 - Body ground | Front door unlock detection switch RH input | Front door RH locked | 11 to 14 V |
| Front door RH unlocked | Below 1 V | ||
| 4B-13 - Body ground | Front door unlock detection switch LH input | Front door LH locked | 11 to 14 V |
| Front door LH unlocked | Below 1 V | ||
| 4B-14 - Body ground | Rear door unlock detection switch LH input | Rear door LH locked | 11 to 14 V |
| Rear door LH unlocked | Below 1 V | ||
| 4B-24 - Body ground*1 | Center tray illumination light (No. 1 instrument panel light sub-assembly), front passenger side tray illumination light (No. 1 instrument panel light sub-assembly) and door ambient light (door trim board sub-assembly) power supply | Always | 11 to 14 V |
| 4B-29 - Body ground | Illuminated entry system drive output | Map light assembly, spot light assembly and No. 1 room light assembly off (when operated by illuminated entry system) | 11 to 14 V |
| Map light assembly, spot light assembly and No. 1 room light assembly on (when operated by illuminated entry system) | Below 1 V | ||
| 4D-24 - Body ground | Rear door courtesy light switch assembly (for LH) input | Rear door LH open | Below 1 V |
| Rear door LH closed | 11 to 14 V | ||
| 4D-34 - Body ground | Back door lock assembly with courtesy light switch input | Back door open | Below 1 V |
| Back door closed | 11 to 14 V | ||
| H43-17 (LSWR) - Body ground | Rear door unlock detection switch RH input | Rear door RH locked | 11 to 14 V |
| Rear door RH unlocked | Below 1 V | ||
| H43-1 (FLCY) - Body ground | Front door courtesy light switch assembly (for LH) input | Front door LH open | Below 1 V |
| Front door LH closed | 11 to 14 V | ||
| H43-2 (FLCL) - Body ground | Courtesy light assembly LH drive output | Courtesy light assembly LH off | 11 to 14 V |
| Courtesy light assembly LH on | Below 1 V | ||
| H43-3 (FRCL) - Body ground | Courtesy light assembly RH drive output | Courtesy light assembly RH off | 11 to 14 V |
| Courtesy light assembly RH on | Below 1 V | ||
| H43-6 (FRCY) - Body ground | Front door courtesy light switch assembly (for RH) input | Front door RH open | Below 1 V |
| Front door RH closed | 11 to 14 V | ||
| H44-20 (LED1) - Body ground*1 | Center tray illumination light (No. 1 instrument panel light sub-assembly), front passenger side tray illumination light (No. 1 instrument panel light sub-assembly) and door ambient light (door trim board sub-assembly) drive output | Center tray illumination light (No. 1 instrument panel light sub-assembly), front passenger side tray illumination light (No. 1 instrument panel light sub-assembly) and door ambient light (door trim board sub-assembly) off | 11 to 14 V |
| Center tray illumination light (No. 1 instrument panel light sub-assembly), front passenger side tray illumination light (No. 1 instrument panel light sub-assembly) and door ambient light (door trim board sub-assembly) dimmer control operating (dimming) | Pulse generation | ||
| Center tray illumination light (No. 1 instrument panel light sub-assembly), front passenger side tray illumination light (No. 1 instrument panel light sub-assembly) and door ambient light (door trim board sub-assembly) at full brightness | Below 2.2 V | ||
CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)
| *A | for Gasoline Model | - | - |
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| H48-10 (SWIL) - H48-11 (AGND) | Push start switch illumination drive output | Push start switch illumination on | 11 to 14 V |
| Push start switch illumination off | Below 1 V |