69065A
1.INSPECT AIRBAG CUT OFF SWITCH CYLINDER SUB-ASSEMBLY
| *a | Component without harness connected
(Airbag Cut Off Switch Cylinder Sub-assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 2 (PMC+) - 1 (PMC-) | Cut off switch in ON position | 360 to 440 Ω |
| 2 (PMC+) - 1 (PMC-) | Cut off switch in OFF position | 90 to 110 Ω |
If the result is not as specified, replace the airbag cut off switch cylinder sub-assembly.