Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING VALVE
RM37A0E _53 Suspension _086867 TIRE PRESSURE MONITORING _0418652 TIRE PRESSURE WARNING VALVE A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING VALVE  REMOVAL  


CAUTION / NOTICE / HINT

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during tire pressure warning valve and transmitter removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced (for HV Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Tire pressure warning valve and transmitter
·

Register transmitter ID

·

Initialize tire pressure warning system


·

DTC (Transmitter ID not Received) stored, tire pressure warning light blinks for 1 minute, then illuminates.

·

Tire pressure warning function


for Initialization:(Click here)
for Registration:(Click here)

Necessary Procedures After Parts Removed/Installed/Replaced (for Gasoline Model)
Replaced Part or Performed Procedure Necessary Procedure Effect/Inoperative Function when Necessary Procedure not Performed Link
Tire pressure warning valve and transmitter
·

Register transmitter ID

·

Initialize tire pressure warning system


·

DTC (Transmitter ID not Received) stored, tire pressure warning light blinks for 1 minute, then illuminates.

·

Tire pressure warning function


for Initialization:(Click here)
for Registration:(Click here)

PROCEDURE

Hide 1.REMOVE WHEEL ASSEMBLY

Hide 42607 2.REMOVE TIRE PRESSURE WARNING VALVE AND TRANSMITTER

a.

Remove the tire valve cap.

NOTICE:

Keep the removed tire valve cap.



b.

Remove the valve core to release the air from the tire.

NOTICE:

Make sure that a sufficient amount of air has been released.



c.

Using an 11 mm deep socket wrench, remove the nut and washer.


d.

Drop the tire pressure warning valve and transmitter with grommet into the tire.

HINT:

The grommet may remain attached to the rim.



e.
C180021C06
0.531,0.885 0.979,0.885 false 2.427,0.885 2.958,0.885 false 0.302,0.823 0.604,1.01 0.302,0.188 10 false *1 2.99,0.833 3.302,0.99 0.313,0.156 10 false *a 2.094,1.781 2.406,1.938 0.313,0.156 10 false *b
*1 Tire
*a Shoe
*b 10 to 20 mm (0.394 to 0.787 in.)


Using a tire remover, remove the tire from the disc wheel.

NOTICE:
·

Be careful not to damage the tire pressure warning valve and transmitter due to interference between the valve and the tire bead.

·

Set the tire remover shoe as shown in the illustration.




f.

Take out the tire pressure warning valve and transmitter with grommet from the tire.


g.

Remove the grommet from the tire pressure warning valve and transmitter.