This circuit includes the navigation ECU and radio and display receiver assembly.
Disconnect the H3 radio and display receiver assembly connector.
Disconnect the H18 navigation ECU connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H3-28 (REV2) - H18-19 (REV2) | Always | Below 1 Ω |
| H3-28 (REV2) or H18-19 (REV2) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG