This DTC is stored when a malfunction occurs in the speakers.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C3 | Speaker Output Short | A short is detected in the speaker output circuit | ·
Harness or connector ·
Speaker ·
Radio and display receiver assembly*1 ·
Stereo component amplifier assembly*2 |
*1: w/o Stereo Component Amplifier Assembly
*2: w/ Stereo Component Amplifier Assembly
Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System.
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| w/o Stereo Component Amplifier Assembly | A |
| w/ Stereo Component Amplifier Assembly | B |
A
B
Disconnect the H9 radio and display receiver assembly connector.
Disconnect the H71 and H73 front No. 2 speaker assembly connectors.
Disconnect the K1 and K6 rear speaker assembly connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| H9-1 (FR+) or H71-4 (TWR+) - Body ground | Always | 10 kΩ or higher |
| H9-6 (FR-) or H71-2 (TWR-) - Body ground | Always | 10 kΩ or higher |
| H9-2 (FL+) or H73-4 (TWL+) - Body ground | Always | 10 kΩ or higher |
| H9-7 (FL-) or H73-2 (TWL-) - Body ground | Always | 10 kΩ or higher |
| H9-4 (RR+) or K1-2 - Body ground | Always | 10 kΩ or higher |
| H9-9 (RR-) or K1-1 - Body ground | Always | 10 kΩ or higher |
| H9-3 (RL+) or K6-2 - Body ground | Always | 10 kΩ or higher |
| H9-8 (RL-) or K6-1 - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the J1 and J17 front No. 1 speaker assembly connectors.
Disconnect the H71 and H73 front No. 2 speaker assembly connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| J1-2 or H71-3 (+) - Body ground | Always | 10 kΩ or higher |
| J1-1 or H71-1 (-) - Body ground | Always | 10 kΩ or higher |
| J17-2 or H73-3 (+) - Body ground | Always | 10 kΩ or higher |
| J17-1 or H73-1 (-) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL
Inspect the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL
Inspect the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL
Inspect the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the M37 stereo component amplifier assembly connector.
Disconnect the H13 and H14 front No. 3 speaker assembly connectors.
Disconnect the H72 and H74 front No. 2 speaker assembly connectors.
Disconnect the K1 and K6 rear speaker assembly connectors.
Disconnect the M36 rear No. 2 speaker assembly connector.
Disconnect the W22 and W23 rear No. 3 speaker assembly connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| M37-15 (FR+) or H13-4 (+) - Body ground | Always | 10 kΩ or higher |
| M37-30 (FR-) or H13-2 (-) - Body ground | Always | 10 kΩ or higher |
| M37-11 (FL+) or H14-4 (+) - Body ground | Always | 10 kΩ or higher |
| M37-26 (FL-) or H14-2 (-) - Body ground | Always | 10 kΩ or higher |
| M37-14 (TWR+) or H72-2 (TWR+) - Body ground | Always | 10 kΩ or higher |
| M37-29 (TWR-) or H72-1 (TWR-) - Body ground | Always | 10 kΩ or higher |
| M37-13 (TWL+) or H74-2 (TWL+) - Body ground | Always | 10 kΩ or higher |
| M37-28 (TWL-) or H74-1 (TWL-) - Body ground | Always | 10 kΩ or higher |
| M37-12 (RR+) or K1-2 - Body ground | Always | 10 kΩ or higher |
| M37-27 (RR-) or K1-1 - Body ground | Always | 10 kΩ or higher |
| M37-4 (RL+) or K6-2 - Body ground | Always | 10 kΩ or higher |
| M37-19 (RL-) or K6-1 - Body ground | Always | 10 kΩ or higher |
| M37-8 (WF1+) or M36-4 (WF1+) - Body ground | Always | 10 kΩ or higher |
| M37-23 (WF1-) or M36-3 (WF1-) - Body ground | Always | 10 kΩ or higher |
| M37-7 (WF2+) or M36-2 (WF2+) - Body ground | Always | 10 kΩ or higher |
| M37-22 (WF2-) or M36-1 (WF2-) - Body ground | Always | 10 kΩ or higher |
| M37-9 (SR+) or W22-2 - Body ground | Always | 10 kΩ or higher |
| M37-24 (SR-) or W22-1 - Body ground | Always | 10 kΩ or higher |
| M37-5 (SL+) or W23-2 - Body ground | Always | 10 kΩ or higher |
| M37-20 (SL-) or W23-1 - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the J1 and J17 front No. 1 speaker assembly connectors.
Disconnect the H13 and H14 front No. 3 speaker assembly connectors.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| J1-2 or H13-3 (+) - Body ground | Always | 10 kΩ or higher |
| J1-1 or H13-1 (-) - Body ground | Always | 10 kΩ or higher |
| J17-2 or H14-3 (+) - Body ground | Always | 10 kΩ or higher |
| J17-1 or H14-1 (-) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL
Inspect the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL
Inspect the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL
Inspect the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>LUGGAGE SPEAKER>REMOVAL
Inspect the rear No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>LUGGAGE SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear No. 3 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>BACK DOOR SPEAKER>REMOVAL
Inspect the rear No. 3 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>BACK DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 3 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>PILLAR SPEAKER>REMOVAL
Inspect the front No. 3 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>PILLAR SPEAKER>INSPECTION
Clear the DTCs.
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG