Home › Power Source / Network › A25A-FXS, A25B-FXS (BATTERY / CHARGING) › CHARGING SYSTEM
RM37A0E _57 Power Source / Network _086913 A25A-FXS, A25B-FXS BATTERY / CHARGING _0419406 CHARGING SYSTEM U

A25A-FXS, A25B-FXS BATTERY / CHARGING  CHARGING SYSTEM  TERMINALS OF ECU  


A457154C01
1.333,0.458 1.75,0.708 0.417,0.25 3.385,0.458 3.781,0.698 0.396,0.24 5.365,0.469 5.76,0.708 0.396,0.24 1.417,0.51 1.875,0.708 0.458,0.198 10 false A31 3.469,0.5 3.927,0.698 0.458,0.198 10 false A32 5.458,0.51 5.917,0.708 0.458,0.198 10 false H67 0.208,0.188 0.667,0.385 0.458,0.198 10 false *a
*a Hybrid Vehicle Control ECU - -


HINT:

The standard normal voltage between each pair of hybrid vehicle control ECU terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are also indicated. The result of checks should be compared with the standard normal voltage for that pair of terminals, displayed in the Specified Condition column. The illustration above can be used as a reference to identify the hybrid vehicle control ECU terminal locations.


Hybrid Vehicle Control ECU
Terminal No. (Symbol) Terminal Description Condition Specified Condition
A31-4 (HMCH) - H67-3 (E1) CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)
A31-5 (MREL) - H67-3 (E1) IGCT relay Ignition switch ON 11 to 14 V
A31-8 (LIN3) - H67-3 (E1) LIN communication signal Ignition switch ON (READY) Pulse generation
A31-14 (HMCL) - H67-3 (E1) CAN communication signal Ignition switch ON Pulse generation
(Waveform 1)

a.

Oscilloscope waveforms

HINT:

Oscilloscope waveform samples are provided here for informational purposes. Noise and fluttering waveforms have been omitted.


i.
A284438E06
2.969,1.198 3.427,1.396 0.458,0.198 10 GND 2.969,1.573 3.427,1.771 0.458,0.198 10 GND 0.396,0.646 0.854,0.844 0.458,0.198 10 CH1 0.396,1.229 0.854,1.427 0.458,0.198 10 CH2

Waveform 1 (CAN communication signal)

Item Content
Terminal CH1: A31-4 (HMCH) - H67-3 (E1)
CH2: A31-14 (HMCL) - H67-3 (E1)
Equipment Setting 1 V/DIV., 50 μs./DIV.
Condition Ignition switch ON

HINT:

The waveform will vary depending on the content of the digital communication (digital signal).