The power steering ECU (rack and pinion power steering gear assembly) receives signals from the ECM, steering sensor, skid control ECU (brake actuator assembly) and forward recognition camera via CAN communication.
The power steering ECU (rack and pinion power steering gear assembly) receives signals from the hybrid vehicle control ECU, steering sensor, No. 2 skid control ECU (brake actuator assembly) and forward recognition camera via CAN communication.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Warning Indicate | Return-to-normal Condition | Note |
|---|---|---|---|---|---|---|
| U0100 | Lost Communication with ECM / PCM "A" | Lost communication with ECM | ·
CAN communication system ·
ECM ·
Rack and pinion power steering gear assembly |
EPS warning light: When an error occurs during steering assist, the warning light does not illuminate. For errors that occur before assist (at the time of the decision to start assist), the warning light illuminates. | The ECU judges the system has returned to normal | for Gasoline Model |
| U0126 | Lost Communication With Steering Angle Sensor Module | Lost communication with steering angle sensor | ·
CAN communication system ·
Steering sensor ·
Rack and pinion power steering gear assembly |
EPS warning light: Comes on | The ECU judges the system has returned to normal | - |
| U0129 | Lost Communication with Brake System Control Module | for Gasoline Model:
Lost communication with skid control ECU (brake actuator assembly) for HV Model:
Lost communication with No. 2 skid control ECU (brake actuator assembly) |
for Gasoline Model:
·
CAN communication system ·
Skid control ECU (Brake actuator assembly) ·
Rack and pinion power steering gear assembly for HV Model:
·
CAN communication system ·
No. 2 skid control ECU (Brake actuator assembly) ·
Rack and pinion power steering gear assembly |
EPS warning light: Comes on | The ECU judges the system has returned to normal | - |
| U023A | Lost Communication with Front Camera Module | Lost communication with forward recognition camera | ·
CAN communication system ·
Forward recognition camera ·
Rack and pinion power steering gear assembly |
EPS warning light: Does not come on | The ECU judges the system has returned to normal | - |
| U0293 | Lost Communication with Hybrid Control Module | Lost communication with hybrid vehicle control ECU | ·
CAN communication system ·
Hybrid vehicle control ECU ·
Rack and pinion power steering gear assembly |
EPS warning light: Does not come on | The ECU judges the system has returned to normal or the ignition switch is turned ON again | for HV Model |
for Gasoline Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for Gasoline Model)>HOW TO PROCEED WITH TROUBLESHOOTING
for HV Model: Click herePower Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM (for HV Model)>HOW TO PROCEED WITH TROUBLESHOOTING
| Proceed to |
|---|
| NEXT |
NEXT