63260H
1.REMOVE SLIDING ROOF DRIVE GEAR ASSEMBLY
|
Remove in this Direction |
Remove the bolt.
Disengage the claw and guide to remove the map light bracket.
Remove the 2 bolts and sliding roof drive gear assembly.
63306
2.REMOVE SUNSHADE TRIM SUB-ASSEMBLY
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Remove the screw.
Disengage the guide in the direction indicated by the arrow (1) shown in the illustration.
Disengage the 2 claws in the direction indicated by the arrow (2) shown in the illustration to remove the sliding roof piece sub-assembly LH.
Use the same procedure for the RH side.
|
Remove in this Direction |
Remove the rear sliding roof sunshade stopper as shown in the illustration.
Use the same procedure for the RH side.
|
Remove in this Direction |
Slide and remove the sunshade trim sub-assembly as shown in the illustration.