Home › Engine / Hybrid System › 2GR-FKS (LUBRICATION) › OIL PRESSURE SWITCH
RM37A0E _51 Engine / Hybrid System _086856 2GR-FKS LUBRICATION _0419963 OIL PRESSURE SWITCH A

2GR-FKS LUBRICATION  OIL PRESSURE SWITCH  INSTALLATION  


PROCEDURE

Hide 83530 1.INSTALL ENGINE OIL PRESSURE SWITCH ASSEMBLY

a.
A433160C01
2.74,0.74 2.927,1.208 2.927,1.208 3.042,1.208 false 3.104,1.104 3.354,1.313 0.25,0.208 10 false *a 1.865,1.792 2.177,1.948 0.313,0.156 10 false *b
*a Oil Inlet Port
*b 3 Threads or More
V100144

Adhesive Application Area


Apply adhesive to the area shown in the illustration.

Adhesive:

Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent


NOTICE:
·

Do not apply adhesive to the oil inlet port of the engine oil pressure switch assembly.

·

Apply the adhesive to the first 3 threads or more of the engine oil pressure switch assembly.

·

Apply adhesive to the entire circumference of the thread.

·

Install the engine oil pressure switch assembly within 3 minutes of applying adhesive.




b.

Using a 24 mm deep socket wrench, install the engine oil pressure switch assembly.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)

NOTICE:

Do not start the engine for at least 1 hour after installation.



c.

Connect the engine oil pressure switch assembly connector.


d.

Engage the clamp to connect the wire harness protector.


Hide 4.INSPECT FOR ENGINE OIL LEAK

Hide 53736 5.INSTALL FRONT FENDER APRON SEAL RH