Home › Engine / Hybrid System › 2GR-FKS (STARTING) › STARTER (w/o Stop And Start System)
RM37A0E _51 Engine / Hybrid System _086857 2GR-FKS STARTING _0419969 STARTER A

2GR-FKS STARTING  STARTER  DISASSEMBLY  


PROCEDURE

Hide 28226B 1.REMOVE MAGNET STARTER SWITCH ASSEMBLY

a.
A194756

Remove the nut and disconnect the field coil lead wire from terminal C.


b.
A194757

While holding the magnet starter switch assembly to the starter drive housing assembly, remove the 2 nuts.


c.

Remove the magnet starter switch assembly from the starter drive housing assembly.


Hide 28120 2.REMOVE STARTER YOKE ASSEMBLY

a.
A194758C04
2.302,1.656 2.719,1.656 false 1.896,0.781 2.24,0.24 2.24,0.24 2.479,0.24 false 2.542,0.135 2.854,0.292 0.313,0.156 10 false *1 2.76,1.552 3.073,1.708 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Commutator End Frame Assembly


Remove the 2 through bolts and pull out the starter yoke assembly together with the starter commutator end frame assembly.


Hide 28130 3.REMOVE STARTER COMMUTATOR END FRAME ASSEMBLY

a.
A079721C01
1.292,0.313 1.594,0.135 1.594,0.135 1.823,0.135 false 2.333,1.625 3.052,1.625 false 1.875,0.063 2.188,0.219 0.313,0.156 10 false *1 3.115,1.542 3.427,1.698 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Commutator End Frame Assembly


Remove the starter commutator end frame assembly from the starter yoke assembly.


Hide 28177 4.REMOVE STARTER ARMATURE PLATE

a.
A284247C01
0.396,1.146 1.083,1.146 true 0.781,0.146 1.073,0.146 1.073,0.146 1.521,0.344 true 0.583,0.063 0.896,0.219 0.313,0.156 10 false *1 0.24,1.073 0.552,1.229 0.313,0.156 10 false *2
*1 Starter Yoke Assembly
*2 Starter Armature Plate


Remove the starter armature plate from the starter yoke assembly.


Hide 28132A 5.REMOVE STARTER COMMUTATOR END FRAME COVER

a.
A295761

Using a screwdriver, pry out the starter commutator end frame cover from the starter commutator end frame assembly.


Hide 28160 6.REMOVE STARTER ARMATURE ASSEMBLY

a.
A295762C05
1.552,0.646 1.281,0.646 false 1.115,0.563 1.427,0.719 0.313,0.156 10 false *a
*a Snap Ring Pliers


Secure the starter commutator end frame assembly in a vise between aluminum plates.

NOTICE:

Do not overtighten the vise.



b.

Using snap ring pliers, remove the snap ring and washer.

NOTICE:

Do not drop the starter armature assembly.



c.

Remove the starter armature assembly from the starter commutator end frame assembly.


Hide 28117A 7.REMOVE RUBBER SEAL

a.
A194763

Remove the rubber seal from the starter drive housing assembly.


Hide 8.REMOVE PLANETARY GEAR

a.
A194764

Remove the 3 planetary gears from the starter drive housing assembly.