Home › General › SPECIFICATIONS › 2GR-FKS STARTING › 2020.02–2020.11
RM37A0E _V1 General _086915 SPECIFICATIONS _0415875 2GR-FKS STARTING F

SPECIFICATIONS  2GR-FKS STARTING  SERVICE DATA  


Starter Assembly
Tester Connection Condition Specified Condition
Battery positive (+) terminal - Terminal 30 - Terminal 50 11.5 V Below 90 A

Starter Armature Assembly
Tester Connection Condition Specified Condition
Segment - Segment Always Below 1 Ω
Segment - Starter armature core 10 kΩ or higher

Commutator length Standard length 3.1 mm (0.122 in.)
Maximum length 3.8 mm (0.150 in.)

Starter Commutator End Frame Assembly
Brush length Standard length 9.0 mm (0.354 in.)
Minimum length 4.0 mm (0.157 in.)

Tester Connection Condition Specified Condition
Positive (+) brush - Negative (-) brush Always 10 kΩ or higher

Magnet Starter Switch Assembly
Tester Connection Condition Specified Condition
Terminal 50 - Terminal C Always Below 1 Ω
Terminal 50 - Magnet starter switch assembly body Below 2 Ω

Engine Switch
Tester Connection Condition Specified Condition
5 (SS1) - 6 (AGND)
1 (SS2) - 6 (AGND)
Not pushed 10 kΩ or higher
Pushed Below 1 Ω

Condition Specified Condition
Battery positive (+) → Terminal 9 (SWIL)
Battery negative (-) → Terminal 6 (AGND)
Illuminates

ST Relay
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied to terminals 1 and 2 10 kΩ or higher
Battery voltage applied to terminals 1 and 2 Below 1 Ω