1.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
2.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
58510D
3.SEPARATE FRONT FLOOR CARPET ASSEMBLY
Remove the 2 clips.
Turn back the front floor carpet assembly to the point that the HV battery is visible.
58556C
4.REMOVE REAR FLOOR SILENCER
Remove the 2 clips and rear floor silencer.
5.REMOVE BLOWER SUB-ASSEMBLY (for LH Side)
Disengage the 3 clamps.
Disconnect the battery cooling blower assembly connector.
Remove the 4 bolts.
Disengage the 2 claws to remove the blower sub-assembly from the HV battery.
G92E1A
6.REMOVE NO. 1 HV BATTERY INTAKE DUCT LH
Remove the clip.
Disengage the claw to remove the No. 1 HV battery intake duct LH from the battery cooling blower assembly.
G9230
7.REMOVE BATTERY COOLING BLOWER ASSEMBLY (for LH Side)
Disengage the clamp.
Remove the 3 nuts and battery cooling blower assembly from the No. 2 battery cooling bracket.
Be sure not to touch the fan part of the battery cooling blower assembly.
Do not lift the battery cooling blower assembly using the wire harness.
8.REMOVE BLOWER SUB-ASSEMBLY (for RH Side)
Disconnect the battery cooling blower assembly connector.
Remove the 4 bolts.
Disengage the 2 claws to remove the blower sub-assembly from the HV battery.
G92D1
9.REMOVE NO. 1 HYBRID BATTERY INTAKE DUCT
Remove the 2 clips and No. 1 hybrid battery intake duct from the battery cooling blower assembly.
G9230
10.REMOVE BATTERY COOLING BLOWER ASSEMBLY (for RH Side)
Disengage the clamp.
Remove the 3 nuts and battery cooling blower assembly from the No. 1 battery cooling bracket.
Be sure not to touch the fan part of the battery cooling blower assembly.
Do not lift the battery cooling blower assembly using the wire harness.