BLIND SPOT MONITOR SENSOR LH (MASTER)
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| M43-4 (OMIL) - M43-10 (BLGD) | Outer rear view mirror indicator LH power source | Outer rear view mirror indicator LH illuminated | 3.5 to 9.5 V |
| Outer rear view mirror indicator LH blinking | Alternating between 0 to 9.5 V | ||
| Outer rear view mirror indicator LH not illuminated | Below 1 V | ||
| M43-5 (BLB) - M43-10 (BLGD) | IG power source | Ignition Switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | ||
| M43-10 (BLGD) - Body Ground | Ground | Always | Below 1 V |
BLIND SPOT MONITOR SENSOR RH (SLAVE)
| Terminal No.
(Symbol) |
Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| M2-3 (BUZ) - M2-10 (BRGD) | RCTA buzzer (blind spot monitor buzzer) operation signal | RCTA buzzer (blind spot monitor buzzer) not sounding | 11 to 14 V |
| RCTA buzzer (blind spot monitor buzzer) sounding | Alternating between 0 to 14 V | ||
| M2-4 (OMIR) - M2-10 (BRGD) | Outer rear view mirror indicator RH power source | Outer rear view mirror indicator RH illuminated | 3.5 to 9.5 V |
| Outer rear view mirror indicator RH blinking | Alternating between 0 to 9.5 V | ||
| Outer rear view mirror indicator RH not illuminated | Below 1 V | ||
| M2-5 (BRB) - M2-10 (BRGD) | IG power source | Ignition Switch off | Below 1 V |
| Ignition switch ON | 11 to 14 V | ||
| M2-10 (BRGD) - Body Ground | Ground | Always | Below 1 V |