The television display assembly sends a sound signal to the radio and display receiver assembly via this circuit.
Disconnect the R16 television display assembly connector.
Disconnect the H2 radio and display receiver assembly connector.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| R16-7 (L1+) - H2-7 (CDL+) | Always | Below 1 Ω |
| R16-8 (L1-) - H2-8 (CDL-) | Always | Below 1 Ω |
| R16-9 (R1+) - H2-9 (CDR+) | Always | Below 1 Ω |
| R16-10 (R1-) - H2-10 (CDR-) | Always | Below 1 Ω |
| R16-11 (SLD1) - Body ground | Always | 10 kΩ or higher |
| R16-7 (L1+) or H2-7 (CDL+) - Body ground | Always | 10 kΩ or higher |
| R16-8 (L1-) or H2-8 (CDL-) - Body ground | Always | 10 kΩ or higher |
| R16-9 (R1+) or H2-9 (CDR+) - Body ground | Always | 10 kΩ or higher |
| R16-10 (R1-) or H2-10 (CDR-) - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR SEAT ENTERTAINMENT SYSTEM>PROBLEM SYMPTOMS TABLE
NG