Check that there are no metallic objects placed in front of the front surface of the television display assembly.
No foreign matter
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check whether the customer's device supports "Miracast" functionality.
For supported devices, Refer to Audio and Visual System*1 or Navigation System*2
w/o Navigation System: Click hereAudio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM (for 8 Inch Display)>SYSTEM DESCRIPTION
w/ Navigation System: Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>SYSTEM DESCRIPTION
*1: w/o Navigation System
*2: w/ Navigation System
| Result | Proceed to |
|---|---|
| The customer's device supports "Miracast" functionality | A |
| The customer's device does not support "Miracast" functionality | B |
A
B
Check whether the "Miracast" functionality is set to "On" in the settings of the customer's device.
"Miracast" is normally set to "Off" by default. As a result, the setting must be manually changed to "On".
The operation method differs depending on the device. The name "Miracast" also refers to "Screen Mirroring" and "Media Output", etc.
| Result | Proceed to |
|---|---|
| "Miracast" functionality is set to "On" in the settings of the customer's device | A |
| "Miracast" functionality is not set to "On" in the settings of the customer's device | B |
A
B
Check that the "Wi-Fi power" setting is "On" in the "Wi-Fi" settings on the television display.
Check that the "Access to network" setting is "Off" in the "Wi-Fi" settings on the television display.*
*: w/ "Wi-Fi" (Station) Function
Check that the "Bluetooth power" setting is "Off" on the multi-display.
| Proceed to |
|---|
| NEXT |
NEXT
Check connection:
Check the connection between the device and "Miracast" on the television display in the vehicle and on the device itself.
Allow Miracast video to be streamed to the television display and wait for 15 seconds.
Check that the smart phone screen is displayed on the television display.
If the "Miracast" connection cannot be established even after checking, confirm the connection again.
| Result | Proceed to |
|---|---|
| Smartphone screen is displayed on the television display | A |
| "Miracast" connection cannot be established even after performing the above connection check twice | B |
A
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING
B
Check using another "Miracast" supported device.
| Result | Proceed to |
|---|---|
| Established connection with "Miracast" | A |
| Could not establish connection with "Miracast" | B |
A
B