Stop the vehicle on a level surface.
1.DRAIN DIFFERENTIAL OIL (for Dynamic Torque Control AWD)
Using a 10 mm hexagon socket wrench, remove the rear differential filler plug and gasket.
Using a 10 mm hexagon socket wrench, remove the rear differential drain plug and gasket to drain the differential oil.
As the differential oil may be hot after driving, make sure that the differential is sufficiently cool before starting work.
Do not remove the 2 plugs (A).
Using a 10 mm hexagon socket wrench, install a new gasket and the rear differential drain plug.
2.DRAIN DIFFERENTIAL OIL (for Dynamic Torque Vectoring AWD)
Using a 10 mm hexagon socket wrench, remove the rear differential filler plug and gasket.
Using a 10 mm hexagon socket wrench, remove the rear differential drain plug and gasket to drain the differential oil.
As the differential oil may be hot after driving, make sure that the differential is sufficiently cool before starting work.
Using a 10 mm hexagon socket wrench, install a new gasket and the rear differential drain plug.
3.ADD DIFFERENTIAL OIL (for Dynamic Torque Control AWD)
Add differential oil.
Toyota genuine differential gear oil LX
Add the differential oil in small quantities every few minutes.
Too much or too little oil will lead to differential problems.
| *a | 0 to 5 mm (0 to 0.196 in.) |
Check that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the rear differential filler plug opening.
Inspect for oil leaks if the oil level is low.
Using a 10 mm hexagon socket wrench, install a new gasket and the rear differential filler plug.
After changing the oil, drive the vehicle and then check the oil level again.
4.ADD DIFFERENTIAL OIL (for Dynamic Torque Vectoring AWD)
Add differential oil.
Toyota genuine differential gear oil LX
Add the differential oil in small quantities every few minutes.
Too much or too little oil will lead to differential problems.
| *a | 0 to 5 mm (0 to 0.196 in.) |
Check that the oil level is between 0 to 5 mm (0 to 0.196 in.) from the bottom lip of the rear differential filler plug opening.
Inspect for oil leaks if the oil level is low.
Using a 10 mm hexagon socket wrench, install a new gasket and the rear differential filler plug.
After changing the oil, drive the vehicle and then check the oil level again.
5. INSPECT FOR DIFFERENTIAL OIL LEAK