Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Gasoline Model with Automatic Air Conditioning System) › 2020.02–2020.11
RM37A0E _58 Vehicle Interior _086896 HEATING / AIR CONDITIONING _0420833 AIR CONDITIONING SYSTEM(for Gasoline Model) C

HEATING / AIR CONDITIONING  AIR CONDITIONING SYSTEM(for Gasoline Model)  B14B3  Lost Communication with Rear Panel LIN  


DESCRIPTION

The No. 2 air conditioning control assembly communicates with the air conditioning amplifier assembly via LIN communication.

If a malfunction occurs in the LIN communication system, the air conditioning amplifier assembly will not operate even if the No. 2 air conditioning control assembly is operated.

DTC No. Detection Item DTC Detection Condition Trouble Area Memory
B14B3 Lost Communication with Rear Panel LIN Lost communication with No. 2 air conditioning control assembly
·

Harness or connector

·

No. 2 air conditioning control assembly

·

Air conditioning amplifier assembly


Memorized
(10 sec. or more)*

*: The air conditioning amplifier assembly stores this DTC if the malfunction has occurred for the period of time indicated in the brackets.

WIRING DIAGRAM

E432290E02
3.552,1.719 3.896,1.917 0.344,0.198 10 false IG 4.281,2.135 4.719,2.333 0.438,0.198 10 false RLIN 3.542,2.552 4.021,2.76 0.479,0.208 10 false E 3.375,1.594 3.688,1.792 0.313,0.198 10 false 9 4.667,1.969 4.979,2.167 0.313,0.198 10 false 8 3.375,2.417 3.688,2.615 0.313,0.198 10 false 7 3.24,2.854 3.677,3.052 0.438,0.198 10 false T2 3.25,3.031 4.573,3.458 1.323,0.427 10 false No. 2 Air Conditioning Control Assembly 5.135,2.125 5.573,2.323 0.438,0.198 10 false H64 5.271,3.031 6.823,3.417 1.552,0.385 10 false Air Conditioning Amplifier Assembly 5.167,1.927 5.438,2.115 0.271,0.188 10 false 20 0.688,3.396 2.344,3.604 1.656,0.208 10 false : LIN Communication Line 2.385,1.844 3.521,2.073 1.135,0.229 10 false ECU-IG1 NO. 4 0.469,1.708 1.875,1.938 1.406,0.229 10 false from IG1-NO. 1 Relay 5.531,2.125 5.969,2.323 0.438,0.198 10 false RLIN 5.115,1.146 5.552,1.344 0.438,0.198 10 false H62 5.125,0.74 5.563,0.938 0.438,0.198 10 false H62 5.115,0.323 5.552,0.521 0.438,0.198 10 false H62 5.521,0.313 5.958,0.51 0.438,0.198 10 false B 5.531,0.729 5.875,0.927 0.344,0.198 10 false IG+ 5.521,1.146 5.958,1.344 0.438,0.198 10 false GND 3.635,0.875 4.771,1.104 1.135,0.229 10 false ECU-IG1 NO. 4 1.677,0.74 3.083,0.969 1.406,0.229 10 false from IG1-NO. 1 Relay 2.031,0.313 3.438,0.542 1.406,0.229 10 false from AM2 Fuse 3.677,0.458 4.76,0.688 1.083,0.229 10 false ECU-B NO. 2 5.208,0.125 5.365,0.323 0.156,0.198 10 false 5 5.208,0.552 5.365,0.75 0.156,0.198 10 false 6 5.167,0.958 5.458,1.177 0.292,0.219 10 false 17

CAUTION / NOTICE / HINT

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.


PROCEDURE

1.CHECK HARNESS AND CONNECTOR (NO. 2 AIR CONDITIONING CONTROL ASSEMBLY - BATTERY AND BODY GROUND)
a.
E432373C01
1.51,0.25 2.01,0.5 0.5,0.25 2.094,1.771 1.885,1.323 true 1.438,1.771 1.573,1.323 true 1.688,0.292 2.115,0.5 0.427,0.208 10 false T2 1.385,1.802 1.813,2.01 0.427,0.208 10 false E 2.052,1.802 2.479,2.01 0.427,0.208 10 false IG 0.563,0.24 0.99,0.448 0.427,0.208 10 false *a
*a Front view of wire harness connector
(to No. 2 Air Conditioning Control Assembly)


Disconnect the T2 No. 2 air conditioning control assembly connector.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
T2-7 (E) - Body ground Always Below 1 Ω



c.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Condition Specified Condition
T2-9 (IG) - Body ground Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V



Result:
Proceed to
OK
NG



OK

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING CONTROL ASSEMBLY)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

2.CHECK HARNESS AND CONNECTOR (AIR CONDITIONING AMPLIFIER ASSEMBLY - NO. 2 AIR CONDITIONING CONTROL ASSEMBLY)
a.

Disconnect the H64 air conditioning amplifier assembly connector.


b.

Disconnect the T2 No. 2 air conditioning control assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
H64-20 (RLIN) - T2-8 (RLIN) Always Below 1 Ω
H64-20 (RLIN) or T2-8 (RLIN) - Other terminals and body ground Always 10 kΩ or higher



Result:
Proceed to
OK
NG



OK

3.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (OUTPUT)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (OUTPUT)
a.

Connect the H64 air conditioning amplifier assembly connector.


b.

Disconnect the T2 No. 2 air conditioning control assembly connector.


c.

Using an oscilloscope, check the waveform.

E432374C01
2.25,0.094 2.667,0.354 0.417,0.26 2.01,1.875 2.813,1.208 true 1.698,0.073 2.01,0.229 0.313,0.156 10 false *a 2.344,0.135 2.802,0.333 0.458,0.198 10 false H64 1.823,1.906 2.323,2.135 0.5,0.229 10 false RLIN 2.229,3.229 2.729,3.458 0.5,0.229 10 false GND
*a Component with harness connected
(Air Conditioning Amplifier Assembly)
- -


Item Content
Tester Connection H64-20 (RLIN) - Body ground
Tool Setting 2 V/DIV., 20 μs/DIV.
Condition Ignition switch ON

OK:

The waveform displays properly.



Result:
Proceed to
OK
NG



OK

REPLACE NO. 2 AIR CONDITIONING CONTROL ASSEMBLY

NG

REPLACE AIR CONDITIONING AMPLIFIER ASSEMBLY