84390B
1.INSPECT ELECTRIC PARKING BRAKE SWITCH ASSEMBLY
Check the resistance.
| *a | Component without harness connected
(Electric Parking Brake Switch Assembly) |
| *b | Pulled (Lock) |
| *c | Pushed (Release) |
| *d | Neutral |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 7 (SWI1) - 8 (SWO1) | OFF (Release) | 100 kΩ or higher |
| ON (Lock) | 10 Ω or less | |
| Switch not operated | 100 kΩ or higher | |
| 7 (SWI1) - 1 (SWI2) | OFF (Release) | 10 Ω or less |
| ON (Lock) | 10 Ω or less | |
| Switch not operated | 100 kΩ or higher | |
| 7 (SWI1) - 2 (SWO2) | OFF (Release) | 10 Ω or less |
| ON (Lock) | 100 kΩ or higher | |
| Switch not operated | 10 Ω or less | |
| 1 (SWI2) - 8 (SWO1) | OFF (Release) | 100 kΩ or higher |
| ON (Lock) | 10 Ω or less | |
| Switch not operated | 10 Ω or less | |
| 1 (SWI2) - 2 (SWO2) | OFF (Release) | 10 Ω or less |
| ON (Lock) | 100 kΩ or higher | |
| Switch not operated | 100 kΩ or higher |
If the result is not as specified, replace the electric parking brake switch assembly.