Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (for LHD)
RM37A0E _54 Brake _086869 BRAKE SYSTEM (OTHER) _0420923 BRAKE MASTER CYLINDER A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER  DISASSEMBLY  


PROCEDURE

Hide 1.REMOVE BRAKE MASTER CYLINDER STRAIGHT PIN

a.

Secure the brake master cylinder sub-assembly in a vise.

NOTICE:

Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.



b.
C425732

Using a 5 mm pin punch and a hammer, tap out the brake master cylinder straight pin from the brake master cylinder sub-assembly.

NOTICE:

Do not drop the brake master cylinder reservoir sub-assembly.



Hide 47202 2.REMOVE BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Remove the brake master cylinder reservoir sub-assembly from the brake master cylinder body.


Hide 3.REMOVE MASTER CYLINDER RESERVOIR GROMMET

a.
C425733

Remove the 2 master cylinder reservoir grommets from the brake master cylinder body.


b.

Remove the brake master cylinder body from the vise.