Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › STEERING ANGLE SENSOR
RM37A0E _54 Brake _086868 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0420935 STEERING ANGLE SENSOR A

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  STEERING ANGLE SENSOR  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:

A lock pin is installed to a new steering sensor. Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly.


PROCEDURE

Hide 89245B 2.INSTALL STEERING SENSOR

a.
C372703C01
2.906,0.833 3.156,0.833 true 2.198,1.615 2.375,1.615 2.375,1.615 2.51,1.104 true 2.167,0.229 2.365,0.229 2.365,0.229 2.49,0.594 true 1.375,0.313 1.24,0.313 1.24,0.313 1.115,0.531 true 0.323,0.865 0.573,0.865 true 2.042,1.542 2.219,1.729 0.177,0.188 10 false *a 0.146,0.781 0.313,0.948 0.167,0.167 10 true *b 1.406,0.24 1.604,0.427 0.198,0.188 10 false *c 2,0.156 2.188,0.323 0.188,0.167 10 false *a 3.177,0.76 3.375,0.917 0.198,0.156 10 true *b
*a Guide
*b Pin
*c Lock Pin


Align the 2 pins and 2 guides, and engage the 6 claws to install the steering sensor to the spiral cable sub-assembly.

NOTICE:
·

Do not remove the lock pin before the steering sensor is installed to the spiral cable sub-assembly.

·

Do not damage the pins of the spiral cable sub-assembly and guides of the steering sensor.

·

The spiral cable sub-assembly can be rotated up to 30° even when the interlock is engaged. Therefore, make sure that both guides are aligned properly when installing the steering sensor to the spiral cable sub-assembly.




b.
C372704

Remove the lock pin from the steering sensor.


Hide 3.INSTALL SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY