The skid control ECU (brake actuator assembly) communicates with the following ECUs and sensors via CAN communication.
ECM
TCM (ECM)
Yaw rate and acceleration sensor (airbag sensor assembly)
Steering angle sensor
Airbag sensor assembly
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| U007488 | Control Module Communication Bus "B" Off Bus Off | Any of the following is detected:
·
A bus OFF state occurs once or more within 0.1 seconds, 10 times in succession. ·
When the +BS terminal voltage is between 9.5 and 17.4 V, a delay in receiving data from the yaw rate and acceleration sensor (airbag sensor assembly) and steering angle sensor continues for 1 second or more. ·
When the +BS terminal voltage is between 9.5 and 17.4 V, the following occurs 10 times in succession within 60 seconds: -
A delay in receiving data from the yaw rate and acceleration sensor (airbag sensor assembly) and steering angle sensor occurs once or more within 5 seconds. |
CAN communication system |
| U010087 | Lost Communication with ECM/PCM "A" Missing Message | When the +BS terminal voltage is between 9.5 and 17.4 V and the vehicle speed exceeds 15 km/h (9 mph), data cannot be received from the ECM for 2 seconds or more. | ·
CAN communication system ·
ECM ·
Skid control ECU (brake actuator assembly) |
| U010187 | Lost Communication with TCM Missing Message | When the +BS terminal voltage is between 9.5 and 17.4 V and the vehicle speed exceeds 15 km/h (9 mph), data cannot be received from the TCM (ECM) for 2 seconds or more. | ·
CAN communication system ·
TCM (ECM) ·
Skid control ECU (brake actuator assembly) |
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | Either of the following is detected:
·
When the +BS terminal voltage is between 9.5 and 17.4 V, data from the acceleration sensor (airbag sensor assembly) cannot be received for 1 second or more. ·
When the +BS terminal voltage is between 9.5 and 17.4 V, the following occurs 10 times in succession within 60 seconds: -
Data from the acceleration sensor (airbag sensor assembly) cannot be received once or more within 5 seconds. |
·
CAN communication system ·
Acceleration sensor (airbag sensor assembly) ·
Skid control ECU (brake actuator assembly) |
| U012687 | Lost Communication with Steering Angle Sensor Module Missing Message | Either of the following is detected:
·
When the +BS terminal voltage is between 9.5 and 17.4 V, data from the steering angle sensor cannot be received for 1 second or more. ·
When the +BS terminal voltage is between 9.5 and 17.4 V, the following occurs 10 times in succession within 60 seconds: -
Data from the steering angle sensor cannot be received once or more within 5 seconds |
·
CAN communication system ·
Steering angle sensor ·
Skid control ECU (brake actuator assembly) |
| U015187 | Lost Communication with Restraints Control Module Missing Message | When the +BS terminal voltage is between 9.5 and 17.4 V and the vehicle speed exceeds 7 km/h (4 mph), data cannot be received from the airbag sensor assembly for 5 seconds or more. | ·
CAN communication system ·
Airbag sensor assembly ·
Skid control ECU (brake actuator assembly) |
Perform the Health Check using the GTS.
| Result | Proceed to |
|---|---|
| DTCs for related systems are output together with DTC U007488, U010087, U010187, U012587, U012687 or U015187. | A |
| U007488, U010087, U010187, U012587, U012687 or U015187 is output. | B |
| DTCs are not output. | C |
A
B
C
Click hereGeneral>INTRODUCTION>HOW TO TROUBLESHOOT ECU CONTROLLED SYSTEMS>HOW TO PROCEED WITH TROUBLESHOOTING