CHECK NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY)
| *a | Component without harness connected
(No. 2 Skid Control ECU (Brake Actuator Assembly)) |
- | - |
Disconnect the A57 No. 2 skid control ECU (brake actuator assembly) connectors.
Measure the voltage and resistance according to the value (s) in the table below.
| Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
| A57-14 (+BS) - Body ground | Parking brake motor (parking brake actuator assembly) power supply | Always | 11 to 14 V |
| A57-45 (IG1) - Body ground | IG power supply | Ignition switch ON | 11 to 14 V |
| A57-1 (GND1) - Body ground | Ground | Always | Below 1 Ω |
| A57-13 (MRR+) | Parking brake motor RH (parking brake actuator assembly RH) (+) | - | - |
| A57-12 (MRR-) | Parking brake motor RH (parking brake actuator assembly RH) (-) | - | - |
| A57-3 (MRL+) | Parking brake motor LH (parking brake actuator assembly LH) (+) | - | - |
| A57-2 (MRL-) | Parking brake motor LH (parking brake actuator assembly LH) (-) | - | - |
| A57-38 (POL) | Electric parking brake switch indicator light | - | - |
| A57-36 (SWI1) | Electric parking brake switch (electric parking brake switch assembly) | - | - |
| A57-31 (SWO1) | Electric parking brake switch (electric parking brake switch assembly) | - | - |
| A57-41 (SWI2) | Electric parking brake switch (electric parking brake switch assembly) | - | - |
| A57-39 (SWO2) | Electric parking brake switch (electric parking brake switch assembly) | - | - |
| A57-27 (CANH) | CAN communication line (H) | - | - |
| A57-43 (CANL) | CAN communication line (L) | - | - |
| A57-16 (CA2H) | CAN communication line 2 (H) | - | - |
| A57-17 (CA2L) | CAN communication line 2 (L) | - | - |