Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › REAR MOTOR GENERATOR CONTROL SYSTEM
RM37A0E _51 Engine / Hybrid System _086850 HYBRID / BATTERY CONTROL _0420997 REAR MOTOR GENERATOR CONTROL SYSTEM D

HYBRID / BATTERY CONTROL  REAR MOTOR GENERATOR CONTROL SYSTEM  UTILITY  


ALL READINESS


HINT:
·

With "All Readiness", you can check whether or not the DTC judgment has been completed by using the GTS.

·

Check "All Readiness" after simulating malfunction symptoms or for validation after finishing repairs.



a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

Powertrain > Rear Motor Generator > Clear DTCs
50002 396

e.

Turn the ignition switch off and wait for at least 2 minutes.


f.

Turn the ignition switch to ON.


g.

Turn the GTS on.


h.

Perform the DTC confirmation driving pattern to run the DTC judgment.


i.

Enter the following menus: Powertrain / Rear Motor Generator / Utility / All Readiness.

Powertrain > Rear Motor Generator > Utility
Tester Display
All Readiness
50005 396 20

j.

Input the DTCs to be confirmed.


k.

Check the DTC judgment result.

GTS Display Description
NORMAL
·

DTC judgment completed

·

System normal


ABNORMAL
·

DTC judgment completed

·

System abnormal


INCOMPLETE
·

DTC judgment not completed

·

Perform the driving pattern



If the judgment result shows INCOMPLETE, perform the DTC confirmation driving pattern again.


l.

Turn the ignition switch off.



CHECK FOR DIAGNOSIS RELATED INFORMATION


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Rear Motor Generator / Utility / Diagnosis Related Information.

Powertrain > Rear Motor Generator > Utility
Tester Display
Diagnosis Related Information
50005 396 56

e.

Check the diagnosis related information and freeze frame data, and then write them down.



CLEAR DIAGNOSIS RELATED INFORMATION


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Powertrain / Rear Motor Generator / Clear DTCs.

Powertrain > Rear Motor Generator > Clear DTCs
50002 396

e.

Clear the diagnosis related information and freeze frame data.



RESOLVER INITIALIZATION


Refer to the resolver initialization for the Motor Generator Control System.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>MOTOR GENERATOR CONTROL SYSTEM (for 4WD/AWD)>UTILITY


RESOLVER LEARNING


Refer to the resolver learning for the Motor Generator Control System.

Click hereEngine / Hybrid System>HYBRID / BATTERY CONTROL>MOTOR GENERATOR CONTROL SYSTEM (for 4WD/AWD)>UTILITY