Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM (for HV Model)
RM37A0E _54 Brake _086868 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0421002 ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model) C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM(for HV Model)  C052696  Steering Angle Sensor Module Component Internal Failure  


DESCRIPTION

The No. 2 skid control ECU (brake actuator assembly) outputs this DTC when it receives an internal malfunction signal from the steering angle sensor.

DTC No. Detection Item DTC Detection Condition Trouble Area Note
C052696 Steering Angle Sensor Module Component Internal Failure With the +BS terminal voltage 9.5 to 17.4 V, the No. 2 skid control ECU (brake actuator assembly) receives an error signal from the steering angle sensor. Steering angle sensor Output ECU: No. 2 skid control ECU (brake actuator assembly)

PROCEDURE

1.REPLACE STEERING ANGLE SENSOR

NEXT

END