Home › Drivetrain › GF2A (TRANSFER / 4WD / AWD) › DYNAMIC TORQUE CONTROL AWD SYSTEM
RM37A0E _52 Drivetrain _086861 GF2A TRANSFER / 4WD / AWD _0421155 DYNAMIC TORQUE CONTROL AWD SYSTEM U

GF2A TRANSFER / 4WD / AWD  DYNAMIC TORQUE CONTROL AWD SYSTEM  TERMINALS OF ECU  


CHECK 4WD ECU ASSEMBLY


C363793E02
2.75,0.167 3.083,0.417 0.333,0.25 4.167,0.167 4.5,0.417 0.333,0.25 4.198,0.208 4.531,0.458 0.333,0.25 10 false M42 2.781,0.208 3.198,0.542 0.417,0.333 10 false M41

a.

Measure the voltage and resistance of the connector.

Terminal No. (Symbol) Terminal Description Condition Specified Condition
M41-1 (GND) - Body ground Ground Always Below 1 Ω
M41-2 (BSLC) - M41-1 (GND) 4WD ECU assembly power supply Always 11 to 14 V
M41-3 (TNF) - M41-1 (GND) No. 1 4 wheel drive position switch input Ignition switch ON 0.5 to 4.5 V
M41-5 (SLF+) - M41-1 (GND) Front 4WD linear solenoid (transfer assembly) (+) output Ignition switch ON 2.2 to 11.2 V
M41-6 (SLF-) - M41-1 (GND) Front 4WD linear solenoid (transfer assembly) (-) output Ignition switch ON 2.2 to 11.2 V
M41-9 (PS-) - M41-1 (GND) Transmission revolution sensor input Ignition switch ON 0.2 to 3.9 V
M41-11 (TVCF) - M41-1 (GND) No. 1 4 wheel drive position switch power supply output Ignition switch ON 4.5 to 5.5 V
M41-13 (THR+) - M41-1 (GND) Temperature sensor (+) input Ignition switch ON 0.5 to 4.5 V
M41-16 (SLFS) - M41-1 (GND) Front 4WD linear solenoid (transfer assembly) shield ground Always Below 10 Ω
M41-18 (TEF) - M41-1 (GND) No. 1 4 wheel drive position switch ground Always Below 10 Ω
M41-19 (PS+) - M41-1 (GND) Transmission revolution sensor power supply output Ignition switch ON 9 to 14 V
M41-21 (THR-) - M41-1 (GND) Temperature sensor (-) input Ignition switch ON 0.5 to 4.5 V
M41-24 (IG1) - M41-1 (GND) 4WD ECU assembly power supply input Ignition switch ON 11 to 14 V
M42-4 (SLC+) - M42-3 (SLC-) 4WD linear solenoid (electro magnetic control coupling sub-assembly) signal D position, engine idling Pulse generation (See waveform 1)
M42-5 (SLR+) - M41-1 (GND) Rear 4WD linear solenoid (rear differential carrier assembly) (+) output Ignition switch ON 2.2 to 11.2 V
M42-6 (SLR-) - M41-1 (GND) Rear 4WD linear solenoid (rear differential carrier assembly) (-) output Ignition switch ON 2.2 to 11.2 V
M42-16 (SLRS) - M41-1 (GND) Rear 4WD linear solenoid (rear differential carrier assembly) shield ground Always Below 10 Ω
M42-17 (CANH) - M42-26 (CANL) CAN communication line Ignition switch off 54 to 69 Ω
M42-18 (OMS) - M41-1 (GND) Multi-terrain select switch (crawl control switch assembly) input Ignition switch ON (Switch not operated) 11 to 14 V
M42-19 (OMSG) - M41-1 (GND) Multi-terrain select switch (crawl control switch assembly) ground Always Below 10 Ω


b.
C170221E01
2.917,1.729 3.271,1.865 0.354,0.135 10 GND

Using an oscilloscope, check the waveform 1.

Waveform 1 (Reference)
Item Content
Terminal No. (Symbol) M42-4 (SLC+) - M42-3 (SLC-)
Tester Range 2 V/DIV., 1 msec./DIV.
Condition D position, Idling