Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RECEIVER
RM37A0E _53 Suspension _086867 TIRE PRESSURE MONITORING _0421218 TIRE PRESSURE WARNING RECEIVER A

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RECEIVER  INSTALLATION  


PROCEDURE

Hide 897B0A 1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:
·

Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.

·

If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.



a.

Connect the connector.


b.

Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


Hide 64740C 2.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH