Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT DRIVE SHAFT ASSEMBLY (for 2GR-FKS) › from 2020.11
RM37A0E _52 Drivetrain _086862 DRIVE SHAFT / PROPELLER SHAFT _0421213 FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FKS) G

DRIVE SHAFT / PROPELLER SHAFT  FRONT DRIVE SHAFT ASSEMBLY(for 2GR-FKS)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT DRIVE SHAFT ASSEMBLY

a.
C211744

Check that there is no excessive play in the radial direction of the outboard joint.


b.

Check that the inboard joint slides smoothly in the thrust direction.


c.

Check that there is no excessive play in the radial direction of the inboard joint.


d.

Check the boots for damage.


e.
C375241C04
0.167,0.167 0.542,0.406 0.375,0.24 10 false *A 0.115,1.385 0.49,1.625 0.375,0.24 10 false *B 1.479,0.917 1.635,1.115 0.156,0.198 10 false A 0.688,0.667 0.948,0.979 0.26,0.313 10 false B 1.438,2.875 1.594,3.073 0.156,0.198 10 false A 0.25,2.635 0.51,2.948 0.26,0.313 10 false B
*A for LH Side
*B for RH Side


Check whether the drive shaft dimension (A) and (B) are within specification.

NOTICE:

Keep the drive shaft assembly level during inspection.


Dimension (A):
for LH Side 621.1 mm (2.04 ft.)
for RH Side for 2WD 946.5 mm (3.10 ft.)
for AWD 949 mm (3.11 ft.)


Dimension (B):
for LH Side 105.2 to 105.8 mm (4.15 to 4.16 in.)
for RH Side for 2WD 97.3 to 98.3 mm (3.84 to 3.87 in.)
for AWD -